Abstract:In this study, organic structure-directing agents (OSDA) of TPA + are used as templating agents to synthesize zeolites with different topologies, and are also served as protectants for alkali treatment to inhibit the severe silicon extraction from zeolite skeleton. The TPA + cations could be bound to the negatively charged Al sites in the framework, so we prepared a series of Cu-based ZSM-5 catalysts with meso-/microporous composite structure by using TPA + cation as a protectant for alkali treatment and evaluated the pore structures by using the hierarchy factor (HF). The results show the microporous-/mesoporous hierarchical structure of the alkali-etched catalyst with the maximal HF (0.115) effectively improved the low-temperature activity on selective catalytic reduction (SCR) of NO by ammonia, achieving complete NO x to N 2 conversion at 225-400 oC. It was shown that the TPA + cation played an important role on protecting the crystallinity, long-range order, and pore connectivity of zeolites, and substantially widened the mesopore volume with the loss of a small portion of micropores. In addition, the alkali treatment strategy involving protectant was systematically studied, including the corresponding effect on the pore structure, redox ability, acidity, and copper ion dispersion. The N 2 adsorption-desorption experiments revealed that the maximization of the HF can be obtained by adjusting the ratio of protectant to etchant (TPA + /OH - ). Among them, the Cu/ZSM-5 catalyst associated with the ratio of TPA + /OH - =0.4 and the best activity has a maximum surface area of 515 m 2 /g, which enhances the mesopore volume (0.325 cm 3 /g) by approximately three times simultaneously with only a 16.9% loss of the micropore volume (0.154 cm 3 /g). The hierarchically porous zeolites not only enhance the diffusion of mobile hydrated copper ions and ammonia-solvated copper complexes, but also facilitate the dispersion of copper ions. This work provides a feasible strategy to rapidly enhance the low-temperature de NO x efficiency on the zeolite catalysts.

Micro-structured Cu-ZSM-5 catalyst on aluminum microfibers for selective catalytic reduction of NO by ammonia

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Outstanding low-temperature performance for NH3-SCR of NO over broad Cu-ZSM-5 sheet with highly exposed a-c orientation

Synthesis and evaluation of mesopore structured ZSM-5 and a CuZSM-5 catalyst for NH3-SCR reaction: Studies of simulated exhaust and engine bench testing

High-performance Fe-Cu composite oxide for selective catalytic reduction of NO with NH3: Driving of Cu on α-Fe2O3

New insights into the NH3-selective catalytic reduction of NO over Cu-ZSM-5 as revealed by operando spectroscopy

Selective catalytic reduction over Cu-exchanged X zeolite catalyst: in situ DRIFTS and DFT studies of NH 3 -SCR mechanism

NH3-SCR of NO over M/ZSM-5 (M = Mn, Co, Cu) catalysts: An in-situ DRIFTS study

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Rational design on hierarchically porous Cu/ZSM-5 zeolite for promoting low-temperature NH 3 -SCR performance based on protectively alkali-etching strategy

Low temperature SCR denitration with NH3 by highly dispersed Ni–Cu Sites: An insight into surface acidity and redox ability

Design, Synthesis, and Insights into the Redox Mechanism of Highly Efficient One-Pot Cu-ZSM-5 Catalysts for the Reduction of NO x by NH 3 -SCR at Low Temperatures

Selective Catalytic Reduction of NO over Mo/ZSM-5 Catalyst

Strong metal oxide-zeolite interactions during selective catalytic reduction of nitrogen oxides

Efficient FeMn/Al2O3 catalyst for NH3-SCR of NO at low temperature: the Influence of Strong Interactions Between Active Components and Carrier

Controlled synthesis of Cu-based SAPO-18/34 intergrowth zeolites for selective catalytic reduction of NOx by ammonia

Hybrid Cu-Fe/ZSM-5 Catalyst Prepared by Liquid Ion-Exchange for NOx Removal by NH3-SCR Process

Selective Catalytic Reduction of NOx by NH3 over Cu-AEI Zeolite Catalyst: Current Status and Future Perspectives

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water