Abstract:To further improve the activity of Selective Catalytic Reduction of nitrogen oxide (NO x ) with Ammonia (NH 3 -SCR) and the hydrothermal stability at 900 °C on Cu-based small-pore zeolite catalyst, the interaction between ammonia water and Cu 2+ is used to regulate the interaction between Cu 2+ and Si-O-Al structures of the zeolite, and affect the migration of Cu 2+ in the channels of zeolite. The characterization results show that the microchemical environment of isolated Cu 2+ species is optimized, and more isolated Cu 2+ species can stably exist over the surface of Cu/SSZ-39, exhibiting a strong redox property. Besides, the ability of acid sites to adsorb and activate NH 3 is also enhanced, and the amount of H 2 O adsorbed in the pores of zeolite is reduced due to the stable surface isolated Cu 2+ species, which is conducive to the stability of the catalyst after hydrothermal aging at 900 °C. When the mole ratio of ammonia and copper is 3, the NH 3 -SCR performance and the hydrothermal stability at 900 oC are both optimized on the modified catalyst. The temperature window that the NO x conversion is higher than 90% (ΔT 90 ) on the unmodified catalyst is 200–475 °C, but the ΔT 90 on the modified catalyst is broadened to 178–544 °C. More importantly, after hydrothermal aging at 900 oC, the ΔT 90 on the modified catalyst is shifted to the higher temperature by 48 oC, with the maximum NO x conversion of 96%. This work would provide a new strategy for further optimizing Cu/SSZ-39 catalyst for deNO x emitted from diesel engines to meet higher emission standards in future.

Cu-SAPO-56, a potential catalyst for the selective catalytic reduction of NOx by NH3

Cu-SAPO-17: A novel catalyst for selective catalytic reduction of NO

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Influence of hydrothermal time on the formation of SAPO-56 structure and its catalytic activity of removal NOx by NH3-SCR with Cu/SAPO-56

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Excellent Performance of One-Pot Synthesized Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx with NH3

Selective Catalytic Reduction of NOx by NH3 over Cu-AEI Zeolite Catalyst: Current Status and Future Perspectives

The Promotional Role of Nd on the Catalytic Activity and Hydrothermal Stability of Cu-SAPO-18 Catalyst for NH3-SCR Reaction

Boosting the Catalytic Performance of Cu-SAPO-34 in NOx Removal Via Hydrothermal Treatment.

Controlled synthesis of Cu-based SAPO-18/34 intergrowth zeolites for selective catalytic reduction of NOx by ammonia

Catalytic Activity of Cu–SSZ-13 Prepared with Different Methods for NH3-SCR Reaction

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Mixed Catalyst SmMn2O5/Cu-SAPO34 for NH3-Selective Catalytic Oxidation

Outstanding low-temperature performance for NH3-SCR of NO over broad Cu-ZSM-5 sheet with highly exposed a-c orientation

Cu/SAPO-34 prepared by a facile ball milling method for enhanced catalytic performance in the selective catalytic reduction of NO x with NH 3 .

Insights into the active sites of copper species in CuO/SiO2 catalysts for NH3-SCR: Quantitative analysis and mechanism study

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Low-Cost CuX Catalyst from Blast Furnace Slag Waste for Low-Temperature NH 3 -SCR: Nature of Cu Active Sites and Influence of SO 2 /H 2 O