Abstract:Sulfur species inactivate Cu ions and lead to inferior SCR activity below 400 °C;Copper bisulfate and ammonium bisulfate can be inter-transformed;NO+O2 convert ammonium bisulfate to copper bisulfate, which is difficult in recovery;NH3 adsorption helps to decompose sulfate species and recover SCR activity easily.In order to investigate sulfate poisoning of Cu/SSZ-13 catalysts used for NOx removal by selective catalytic reduction with ammonia (NH3-SCR), they were exposed to SO2 at different temperatures in the presence and absence of NH3. Standard physicochemical characterization and density functional theory calculations were performed to probe the nature of the sulfate species formed on the catalyst and the corresponding effects. The results showed that sulfate poisoning has little effect on the chabazite structure of the catalyst, but the sulfate species formed blocks the Cu/SSZ-13 pores. For sulfation with pure SO2, copper bisulfate forms and its content increases with sulfation temperature. However, in the presence of NH3, the major sulfate formed is ammonium bisulfate (~80%). Moreover, the total sulfate contents are lower for higher sulfation temperatures because of difficulties in ammonium bisulfate formation. Regardless of the kind of sulfate species formed, the poisoning leads to lower availability of active sites, causing inferior NOx conversion. Importantly, as copper bisulfate and ammonium bisulfate on Z-Cu(OH)+ are interconvertible, our study reveals that using NH3 to promote the transformation from copper bisulfate to ammonium bisulfate is a viable method to improve the recovery effect of sulfated Cu/SSZ-13.The schematic diagram in the effect of sulfate species formation and transformation on and SCR activity and regeneration over Cu/SSZ-13 catalysts<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1876107021000018-fx1_lrg.jpg">Download : Download high-res image (166KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1876107021000018-fx1.jpg">Download : Download full-size image</a></li></ol>

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Nature Identification of Cu Active Sites in Sulfur-Fouled Cu/SAPO-34 Regeneration

Deactivation and Regeneration for the SO2-Poisoning of a Cu-SSZ-13 Catalyst in the NH3-SCR Reaction

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Effects of regeneration conditions on sulfated CuSSZ-13 catalyst for NH 3 -SCR

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

The Effect of Sulfate Species on the Activity of NH3-SCR over Cu/SAPO-34

Effect of Cu loading on the performance and kinetics of Cu/SAPO-34 catalysts for selective catalytic reduction with NH3

Boosting the Catalytic Performance of Cu-SAPO-34 in NOx Removal Via Hydrothermal Treatment.

Controlled synthesis of Cu-based SAPO-18/34 intergrowth zeolites for selective catalytic reduction of NOx by ammonia

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

Effective reduction of nitric oxide over a core–shell Cu-SAPO-34@Fe-MOR zeolite catalyst

Research Progress on Sulfur Deactivation and Regeneration over Cu-CHA Zeolite Catalyst

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Optimization of Hybrid Crystal with SAPO-5/34 on Hydrothermal Stability for deNOx Reaction by NH3

A Facile and Controllable in Situ Sulfation Strategy for CuCeZr Catalyst for NH3-SCR

Boosting the catalytic performance of Cu-SAPO-34 in NO removal via hydrothermal treatment

Unraveling the nature of sulfur poisoning on Cu/SSZ-13 as a selective reduction catalyst

Cu-SAPO-17: A novel catalyst for selective catalytic reduction of NO

A novel regeneration method for deactivated commercial NH3-SCR catalysts with promoted low-temperature activities

Reaction Pathways of Standard and Fast Selective Catalytic Reduction over Cu-SSZ-39