Abstract:Laterally excited bulk acoustic resonators (XBARs) are plate mode resonators in which one of the higher-order plate modes transforms into the bulk acoustic wave (BAW) due to the very thin plates used in these devices. The propagation of the primary mode is usually accompanied by numerous spurious modes, which deteriorate resonator performances and restrict potential XBARs' applications. This article suggests a combination of different methods for insight into the nature of the spurious modes and their suppression. Analysis of the BAW slowness surface provides optimization of XBARs for single-mode performance in the filter passband and around it. The rigorous simulation of admittance functions in the optimal structures allows for further optimization of electrode thickness and duty factor. Finally, the nature of different plate modes generated in a wide frequency range is clarified via simulation of dispersion curves, which characterize acoustic mode propagation in a thin plate under the periodic metal grating, and visualization of displacements accompanying wave propagation. Application of this analysis to lithium niobate (LN)-based XBARs demonstrated that in LN cuts with Euler angles (0°, 4°-15°, 90°) and plate thickness dependent on orientation and varying between 0.05 and 0.1 wavelengths, the spurious-free response could be achieved. Due to tangential velocities of 18-37 km/s combined with the coupling of 15%-17% and feasible duty factor a/p = 0.5, the found XBAR structures can be applied in high-performance 3-6 GHz filters.

Laterally-excited bulk acoustic wave resonator with an adjustable piezoelectric coupling coefficient

Tunable Electromechanical Coupling Coefficient of a Laterally Excited Bulk Wave Resonator with Composite Piezoelectric Film

Study of High-Q Laterally Excited Bulk Wave Resonator with Smaller Gap-width Reflectors

Design and Fabrication of Lithium Niobate Asymmetrical Mode Resonators toward C-band and Ku-band

A laterally excited bulk acoustic resonator with scattering vias in electrodes

Design and Analysis of Lithium-Niobate-Based Laterally Excited Bulk Acoustic Wave Resonator with Pentagon Spiral Electrodes.

Enhanced Coupling Coefficient in Dual-Mode ZnO/SiC Surface Acoustic Wave Devices with Partially Etched Piezoelectric Layer

High Electromechanical Coupling Coefficient of Longitudinally Excited Shear Wave Resonator Based on Optimized Bragg Structure

Suppression of spurious modes in lateral-excited bulk acoustic wave resonators using piston mode electrodes

Laterally Excited Resonators Based on Single-Crystalline LiTaO3 Thin Film for High-Frequency Applications

Influence of Etching Trench on Keff2 of Film Bulk Acoustic Resonator

Electrically Tunable Film Bulk Acoustic Resonator Based On Au/Zno/Al Structure

Lateral Size-Dependence in UHF Mode-Coupled ZnO FBARs to Suppress Undesirable Eigen-Modes and Weaken Mounting Effect

High Electromechanical Coupling Factor Lamb Wave Resonator

Spurious Modes in Laterally Excited Bulk Acoustic Resonators (XBARs): Analysis and Suppression

Analytical and experimental study on the second harmonic mode response of a bulk acoustic wave resonator

Elastic Effects of Electrode on Thin Film Bulk Acoustic Resonator (Fbar)

Negative Piezoelectric-Based Electric-Field-Actuated Mode-Switchable Multilayer Ferroelectric FBARs for Selective Control of Harmonic Resonances Without Degrading Keff²

Optimization of Mason Model in Thin Film Bulk Acoustic Resonators with Extra Passivating Piezoelectric Structures

3-D FEM simulation of piezoelectric boundary acoustic wave resonator

Ultra-wideband surface acoustic wave resonator employing Pb(In<sub>1/2</sub>Nb<sub>1/2</sub>)O<sub>3</sub>-Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-PbTiO<sub>3</sub> crystals