Abstract:Lamb wave resonators (LWRs) based on lithium niobate on insulator (LNOI) substrates operating in an A1 mode at frequencies above 5 GHz typically exhibit high electromechanical coupling coefficients (K2) ranging from 20% to 30%. This makes them promising candidates to replace current bulk acoustic wave technology in next-generation broadband RF filters. However, the K2 of conventional LWRs still struggles to meet application requirements for bandwidths exceeding 1 GHz, such as WiFi-6E. This paper presents an analytical optimization approach for rapid and comprehensive scanning of the full 3D Euler space to find the maximum effective K2 of LWR devices. Such a full scan is difficult to achieve by the conventional time-consuming finite element method (FEM). The K2 results for a selected subset of Euler angles obtained through this analytical approach align with FEM simulation results. The optimized results show that LWRs on LNOI can achieve the highest K2 of 59.92% at Euler angles of (0, −151°, −60°), providing bandwidths exceeding 1 GHz at 5 GHz. To validate this optimization approach, LWRs with various orientations were fabricated on both 41° YX-cut and Z-cut LNOI wafers, with measured K2 values at different Euler angles agreeing well with both analytical and FEM results. The proposed K2 optimization method serves as a valuable guideline for selecting substrate cuts and device orientations in the design of ultra-broadband filters for next-generation telecommunications.

High Electromechanical Coupling Factor Lamb Wave Resonator

High Figure-of-Merit A1-Mode Lamb Wave Resonators Operating Around 6 GHz Based on the LiNbO3 Thin Film

Broadband Highly Efficient Nonlinear Optical Processes in On-Chip Integrated Lithium Niobate Microdisk Resonators of Q-factor above 108

6 GHz lamb wave acoustic filters based on A1-mode lithium niobate thin film resonators with checker-shaped electrodes

Area Dependence of Effective Electromechanical Coupling Coefficient Induced by On-Chip Inductance in LiNbO3-Based BAW Resonators

Design and Optimization of the Dual-Mode Lamb Wave Resonator and Dual-Passband Filter

4.9 GHz A<inf>1</inf>-mode Lamb Wave Resonator based on Partially Released LN Film

High-performance SH-SAW resonator using optimized 30 degrees YX-LiNbO3/SiO2/Si

High-Performance Wideband SAW Filters on LNOI Platform

High-performance SH-SAW resonator using optimized 30° YX-LiNbO 3 /SiO 2 /Si

Double-layer Thin-film LiNbO3 Longitudinally Excited Shear Wave Resonators with Ultra-large Electromechanical Coupling Coefficient and Spurious-Free Performance

A near spurious-free 6 GHz LLSAW resonator with large electromechanical coupling on X-cut LiNbO3/SiC bilayer substrate

AlN/ScAlN composite films-based spurious free A1 mode lamb wave resonator with adjustable effective electromechanical coupling coefficient

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

A Fin-Mounted A5-Mode Lithium Niobate Resonator at 27.58 GHz with $k^{2}$ of 4.4%, $q_{\mathrm{p}}$ of 448, and FoM of 19.7

Heterogeneous Integration of 42°YX LiNbO3/SiO2/Quartz for Wideband and Spurious-Free SAW Resonators

LiNbO3 Surface Acoustic Wave Resonators with Large Effective Electromechanical Coupling

LITHIUM NIOBATE THIN FILM BASED A1 MODE RESONATORS WITH FREQUENCY UP TO 16 GHZ AND ELECTROMECHANICAL COUPLING FACTOR NEAR 35%

Large Coupling and Spurious-Free SH 0 Plate Acoustic Wave Resonators Using LiNbO 3 Thin Film

Analysis and Suppression of Spurious In-Plane Lamé-Like Modes in Lamb Wave Resonators

Enlarging Rayleigh Elimination Window Through Modulating Substrate and LiNbO3 Cut Angle for Fabricating LNOI-Based Spurious-Free Wideband SAW Filters