Abstract:Silicon carbide is a promising semiconductor material for electrical and optoelectronic applications in the area of high power, high temperature, high frequency and intense radiation. Many groups have worked on growing SiC bulk crystals by sublimation from SiC powder source at a temperature above 2000 oC under an argon environment. They have also worked on improving the crystal growth rate. Traditional approach is to increase furnace temperature to enhance the growth rate. However, high cost of inert crucible at high temperature and impurity caused by crucible degradation set limit on the maximum growth rate which can be achieved. Current existing crucible and other components in the furnace are no longer passive at high temperature. Also understanding of vapor transport during powder sublimation and the interplay between vapor transport and powder sublimation is important for the optimization of the sublimation growth process. A comprehensive numerical model combining heat transfer, sublimation, species transport, and powder porosity evolution of SiC sublimation growth process is developed in this paper. The mechanism of vapor transport is described, in which a driving force is introduced to explain vapor transport. A new method to increase crystal growth rate is proposed based on the model. The new method includes changing the initial powder porosity and creating a hole in the packed powder. Simulation results for the case with a central hole and without hole are presented. The results show that the powder sublimation rate increases by creating a hole, and it is also validated by experiments. The results also reveal that the mass of the as-grown crystal increases if the powder sublimation rate increases. Finally, the powder geometry is optimized using numerical simulations.

High-Speed Growth of 4H-SiC Single Crystal Using Si-Cr Based Melt

Advances in fast 4H–SiC crystal growth and defect reduction by high-temperature gas-source method

Ultrafast growth of single-crystalline Si nanowires

Growth of Crystalline SiC Film Free of Cavities by Heating PS/silica Sol-Gel Coatings on Si (111) Substrate

Review of solution growth techniques for 4H-SiC single crystal

Effects of Solution Height and Crystal Rotation on the Solution Flow Behavior in the Top-Seeded Solution Growth of SiC Single Crystals

Fast Homoepitaxial Growth of 4H-Sic Films on 4° Off-Axis Substrates in a SiH 4 -C 2 H 4 -H 2 System

Improvement of surface morphology by optimizing the growth conditions in solution growth of SiC single crystal

Physical-Vapor-Transport growth of 4H silicon carbide single crystals by a tiling method

Reduction in dislocation densities in 4H-SiC bulk crystal grown at high growth rate by high-temperature gas-source method

Suppression of SiC Inclusions in 4H-SiC Crystals Grown from Si–Cr–C-Based Solution Saturated with SiC

Advances in 200 mm 4H SiC Wafer Development and Production

Numerical Simulation of a Novel Method for PVT Growth of SiC by Adding a Graphite Block

A sessile drop approach for studying 4H-SiC/liquid silicon high-temperature interface reconstructions

High growth rate 4H-SiC epitaxial growth using dichlorosilane in a hot-wall CVD reactor

Growth and Mechanical Properties of Amorphous and Nanostructured SiC films

High quality and wafer-scale cubic silicon carbide single crystals

Growth of 4H-Sic on AlN/Si(100) Complex Substrate by Chemical Vapor Deposition

Bulk growth of high-purity 6H-SiC single crystals by halide chemical-vapor deposition

Growths of SiC Single Crystals Using the Physical Vapor Transport Method with Crushed CVD-SiC Blocks Under High Vertical Temperature Gradients

Novel Method for High Speed SiC Vapor Growth