Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Effects of Solution Height and Crystal Rotation on the Solution Flow Behavior in the Top-Seeded Solution Growth of SiC Single Crystals

Optimization of Carbon Transport in Top-Seeded Solution Growth of Al-Doped Sic

Optimization of the Thermal Field of 8-Inch SiC Crystal Growth by PVT Method with “3 Separation Heater Method”

Bayesian optimization for a high- and uniform-crystal growth rate in the top-seeded solution growth process of silicon carbide under applied magnetic field and seed rotation

Numerical Simulation of a Novel Method for PVT Growth of SiC by Adding a Graphite Block

Improvement of surface morphology by optimizing the growth conditions in solution growth of SiC single crystal

Endomyocardial biopsy diagnosis of acute rejection in cardiac allografts.

Effect of Crystal Rotation on Melt Convection and Resistivity Distribution in 200 mm Floating Zone Silicon Single Crystal Growth

Modeling-Based Design of the Control Pattern for Uniform Macrostep Morphology in Solution Growth of SiC

Effects of Surface Size and Shape of Evaporation Area on SiC Single-Crystal Growth Using the PVT Method

Review of solution growth techniques for 4H-SiC single crystal

Optimization of thermal field of 150 mm SiC crystal growth by PVT method

Design and Optimization of Thermal Field for PVT Method 8-Inch SiC Crystal Growth

Numerical Simulation of the Transport of Gas Species in the PVT Growth of Single‐Crystal SiC

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Novel Method for High Speed SiC Vapor Growth

Insights into the effect of susceptor rotational speed in CVD reactor on the quality of 4H-SiC epitaxial layer on homogeneous substrates

Diameter enlargement of SiC bulk single crystals based on simulation and experiment

Analysis of Macrostep Interaction via Carbon Diffusion Field in SiC Solution Growth

Effects of different cusp magnetic ratios and crucible rotation conditions on oxygen transport and point defect formation during Cz silicon crystal growth

Molecular Dynamics Simulations of the Effect of Carbon Concentration on Silicon Carbide Crystal Growth