Abstract:The present paper presents a straightforward method for producing thin film layers of sulfide quantum dots (PbS-QDs) on a glass substrate using chemical solution deposition (CSD) assisted by dipcoating technique. The deposited PbS-QDs films were subjected to a comprehensive analysis using atomic force microscopy (AFM), energy dispersive X-ray (EDX) scanning electron microscopy (SEM), X-ray diffraction (XRD), UV–vis–IR absorption, and photoluminescence spectroscopic (PL) techniques to investigate the effects of varying concentrations of diethanol amine (DEA) on their morphology, crystal structure, elemental composition, light absorption, and emission characteristics. The spherical shape of the PbS-QDs was confirmed by AFM and SEM images with average sizes around 100 and 50 nm, respectively. The energy dispersive X-ray (EDX) analysis provides evidence the existence of Pb and S elements within the PbS matrix. X-ray diffraction (XRD) results validate that the deposited films exhibit high crystallinity, with a preferential orientation along the (111) plane and a face-centered cubic lattice structure of PbS. The crystallite size of PbS is measured to be 46.6 nm. Based on the optical absorption measurements, we have determined the size range of PbS nanocrystals to be between 4.3 and 11.5 nm. The optical studies reveal the presence of two optical absorption edges within the visible and infrared spectrum, two direct band gap energy, two cut-off wavelengths, two confinement energy, two Urbach energy tail, and dual emission peaks of PbS-QDs at room temperature. The analysis reveals the presence of two distinct band gap energies, one in the visible range (1.3–2.28 eV) and the other in the infrared range (0.65–0.88 eV), which can be attributed to the formation of two distinct sizes of quantum dots situated in two different layers. The first layer, deposited directly on the glass substrate, comprises quantum dots with an average size of approximately 5.2 nm, while the second layer contains quantum dots with an average size of about 9.5 nm. This ability to tune the band gap of PbS in the visible range up to the IR band (0.65–2.28 eV) is a critical feature that holds the potential for the development of innovative optoelectronic devices.

Structure and properties of PbS films

Microstructure and Optical Properties of Pb_(1-x)Sr_xSe Thin Films

Optical Properties of Pb1-Xmnxse Thin Films

Vacuum-evaporated PbS:0.03 Zn thin films with varying thicknesses for environmental applications

Effects of Deposition Time on the Morphology, Structure, and Optical Properties of PbS Thin Films Prepared by Chemical Bath Deposition

The influence of iodide addition on the composition, morphology, crystal structure, and semiconductor and photoelectric properties of PbS films

Structural, morphological, and optical bandgap properties of ZnS thin films: a case study on thickness dependence

Structural, morphological and optical properties of PbI2 thick films]

Quantized Electronic Structure and Growth of Pb Films on Highly Oriented Pyrolytic Graphite

Band Gap Engineering of Binary and Cobalt‐Doped PbS Thin Films Integrated by SILAR Method for Optoelectronic Potentials

Influence of the DEA Concentration on Structural and Optical Properties of Nanodot PbS Thin Films Growth by Chemical Solution Deposition: Unveiling Dual Optical Absorption Edges

Photoelectric Properties Of Pbse/Baf2/Caf2 Films On Si(111)

Photoelectric properties of PbSe/BaF2/CaF2 films on Si (lll)

Excitonic Line Broadening in Pbsrse Thin Films Grown by Molecular Beam Epitaxy

Solution grown PbS nanoparticle films

Microstructure and optical properties of PbSe nanocrystalline films prepared by magnetron sputtering

Subnanometer-thick PbS Film on Organic Substrate and Its Usage As Buffer for Homo- and Heteroepitaxial Overgrowth.

Size shift of XPS lines observed from PbS nanocrystals

Microstructure and Optical Properties of Pb1-xGexTe Films

Investigation of structural, morphological, optical and electronic properties of Cu-doped PbS thin films: a comparative experimental and theoretical study

Thickness effect on the microstructure, morphology and optoelectronic properties of ZnS films