Abstract:The present paper presents a straightforward method for producing thin film layers of sulfide quantum dots (PbS-QDs) on a glass substrate using chemical solution deposition (CSD) assisted by dipcoating technique. The deposited PbS-QDs films were subjected to a comprehensive analysis using atomic force microscopy (AFM), energy dispersive X-ray (EDX) scanning electron microscopy (SEM), X-ray diffraction (XRD), UV–vis–IR absorption, and photoluminescence spectroscopic (PL) techniques to investigate the effects of varying concentrations of diethanol amine (DEA) on their morphology, crystal structure, elemental composition, light absorption, and emission characteristics. The spherical shape of the PbS-QDs was confirmed by AFM and SEM images with average sizes around 100 and 50 nm, respectively. The energy dispersive X-ray (EDX) analysis provides evidence the existence of Pb and S elements within the PbS matrix. X-ray diffraction (XRD) results validate that the deposited films exhibit high crystallinity, with a preferential orientation along the (111) plane and a face-centered cubic lattice structure of PbS. The crystallite size of PbS is measured to be 46.6 nm. Based on the optical absorption measurements, we have determined the size range of PbS nanocrystals to be between 4.3 and 11.5 nm. The optical studies reveal the presence of two optical absorption edges within the visible and infrared spectrum, two direct band gap energy, two cut-off wavelengths, two confinement energy, two Urbach energy tail, and dual emission peaks of PbS-QDs at room temperature. The analysis reveals the presence of two distinct band gap energies, one in the visible range (1.3–2.28 eV) and the other in the infrared range (0.65–0.88 eV), which can be attributed to the formation of two distinct sizes of quantum dots situated in two different layers. The first layer, deposited directly on the glass substrate, comprises quantum dots with an average size of approximately 5.2 nm, while the second layer contains quantum dots with an average size of about 9.5 nm. This ability to tune the band gap of PbS in the visible range up to the IR band (0.65–2.28 eV) is a critical feature that holds the potential for the development of innovative optoelectronic devices.

Effects of Deposition Time on the Morphology, Structure, and Optical Properties of PbS Thin Films Prepared by Chemical Bath Deposition

Influence of Deposition Time on Structural, Morphological, and Optical Properties of CdS Thin Films Grown by Low-Cost Chemical Bath Deposition

Effect of Holding Time on Structure and Optical Properties of PbSe Films Deposited in a Chemical Bath on Si(100) Substrates

Preparation and characterization of heat-assisted PbS/TiO 2 thin films

Vacuum-evaporated PbS:0.03 Zn thin films with varying thicknesses for environmental applications

Effects of post-deposition treatment on zinc sulfide thin films prepared by an effective-cost chemical bath deposition method

Structure and properties of PbS films

Influence of the DEA Concentration on Structural and Optical Properties of Nanodot PbS Thin Films Growth by Chemical Solution Deposition: Unveiling Dual Optical Absorption Edges

Effect of Chemical Bath Deposition Variables on the Properties of Zinc Sulfide Thin Films: A Review

Effect of sulfurization time on the properties of copper zinc tin sulfide thin films grown by electrochemical deposition

Effect of Annealing Times on the Structural and Optical Properties of PbO Thin Films Prepared by D.C Sputtering

Facile Synthesis and Characterization of PbS thin films doped with various Aluminum Concentrations for Photovoltaic Applications

The influence of iodide addition on the composition, morphology, crystal structure, and semiconductor and photoelectric properties of PbS films

Effect of Bath Temperature on the Properties of CdS Thin Film Deposited by Chemical Bath Deposition

Microstructure and Optical Properties of Pb_(1-x)Sr_xSe Thin Films

Effect of complexing agent and annealing atmosphere on properties of nanocrystalline ZnS thin films

[Study of the Physical Properties of SnS Thin Films Deposited by Ultrasonic Spray Pyrolysis Method].

Synthesis and Characterization of a Semiconductor Diodic Bilayer PbS/CdS Made by the Chemical Bath Deposition Technique

Nanocrystalline ZnS thin films by chemical bath deposition method and its characterization

Preparation and characterization of quantum-sized pbs grown in amphiphilic oligomer Langmuir-Blodgett monolayers

CuS p- type thin film characterization deposited on Ti, ITO and glass substrates using spray pyrolysis deposition (SPD) for light emitting diode (LED) application