Abstract:Silicon etching is a process that is regularly employed in the semiconductor industry for many applications ranging from micromachining on the sub-millimeter scale to intricate pattern formation in tens of nanometer regime. Wet etching is used for bulk silicon removal. Such etching processes, generally, involve multiple chemical reactions where a liquid solution of etching agents removes surface atoms of silicon through chemical or electrochemical redox reactions at the substrate-etchant interface. Many wet etching processes are anisotropic, and thus the wet etching of silicon with hydroxide solutions tends to be direction or crystalline plane specific, allowing for directional control and reduced undercutting of any etch mask. An additional advantage of metal hydroxide etchants rise from their selective nature of extremely poor etch rate towards the basic oxide of silicon. This makes growing the hard mask of SiO2 a very cost effect step in the wet etching process. NaOH and KOH solutions are well known wet etching agents that offer inexpensive alternatives to anisotropic dry etching but are often either difficult to control (etch rate-wise) or result in rough etched surfaces. Only through better understanding of the chemical reaction mechanisms, i.e. the role of alkali metal cations and water molecules during the wet etching process more controllability and desired etch surface profiles can be achieved. This study summarizes the results from a series of wet etch processes with all the five different group 1 alkali metal oxides and discusses in detail how different types of group 1 metal ions impact the dynamics of the chemical reactions in the aqueous medium. Wet etching assisted by smaller cations like Li+ tend to be more controllable while larger cations like Cs+ result in much faster etch rates. Surfactants added to fast etching metal hydroxides result in finer sidewalls and smoothened etched surface on silicon. Later in the paper, the effect of microwave irradiation on the surface tension, structural arrangement of water molecules and its application in anisotropic etching are highlighted. Step by step details of the experiments are provided in the materials and methods section making the study easy to understand. Line profile plots, optical images, SEM micrographs and XRD intensity plots are presented throughout the report to support the given explanations. Research findings from the study experimentally establish a trend for anisotropic etch rates of silicon substrate with aqueous solutions of all the group 1 alkali metal hydroxides. Silicon etch rate increases down the group.

Rapid graphene oxide assisted chemical etching of silicon in HF/H2O2 solution

Graphene Masks As Passivation Layers in the Electrochemical Etching of Silicon

Running droplet of interfacial chemical reaction flow

Optimization of Metal-Assisted Etchant Components for Fabrication of Porous Silicon

In Situ Etching of Graphene by Nonmetallic SiOx Nanoparticles

Progress and Mechanism of Cu Assisted Chemical Etching of Silicon in A Low Cu2+ Concentration Region

MoS2-assisted chemical etching of silicon in an HF/H2O vapor

Chemical etching of silicon assisted by graphene oxide under negative electric bias

The Lateral and Longitudinal Etching Rates of Silicon and Silica on Si(100) Surface

Research on Pt Nanoparticles-Assisted Chemical Etching of Heavily Doped p-Type Monocrystalline Silicon

Metal Ions' Dynamic Effect on Metal-Assisted Catalyzed Etching of Silicon in Acid Solution

Room-temperature Atmospheric Oxidation of Si Nanocrystals after HF Etching

Aqueous Wet Etching of Silicon With Alkali Metal Hydroxides

Rapid anisotropic chemical etching for quick formation of novel octagonal pyramids on silicon surface for photovoltaics

Metal-Assisted Chemical Etching Using Tollen’s Reagent to Deposit Silver Nanoparticle Catalysts for Fabrication of Quasi-ordered Silicon Micro/Nanostructures

Fabrication of antireflective layers on silicon using metal-assisted chemical etching with in situ deposition of silver nanoparticle catalysts

Graphene removal by water-assisted focused electron-beam-induced etching – unveiling the dose and dwell time impact on the etch profile and topographical changes in SiO 2 substrates

The Role of Sulfite in the Wetting Etching of Silicon and Silica

Influence of formaldehyde on the electrochemistry and chemical etching of silicon in alkaline solutions

Chemical Cleaning of Silicon Wafer Surface

Fabrication and Photocatalytic Properties of Silicon Nanowires by Metal-Assisted Chemical Etching: Effect of H 2 O 2 Concentration