Abstract:Rationale In situ trace element analysis of melt inclusions by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) provides important geochemistry information. However, the precision and accuracy of this technique are affected by many factors, such as matrix effect, laser conditions, and calibration method. In addition, many previous LA-ICP-MS studies ablated entire melt inclusions along with their host minerals and obtained trace element composition by deconvoluting the mixed ablation signal, which may induce much uncertainty. Methods A 193 nm ArF laser ablation system combined with inductively coupled plasma sector field mass spectrometry (ICP-SF-MS) was used to investigate matrix effect, laser conditions, choice of external calibration standards, and data reduction strategy for in situ analysis of 36 major and trace elements in six common silicate reference glasses. The validity of the protocol presented here was demonstrated by measuring trace elements in olivine-hosted melt inclusions. Instead of ablating entire melt inclusions along with their host minerals, melt inclusions were polished to the surface to avoid laser ablating the mineral host. Results The calibration lines calculated from the calibration standards should cross the coordinate origin, especially for low-concentration elements (<10 ppm). As the laser crater size increased from 17 to 33 mu m, the precision was improved from <20% to <8% (2RSD), and accuracy was improved from +/- 20% to better than +/- 10%. Most measured trace elements in Dali melt inclusions are consistent with those in their host rocks. For mobile elements (Ba, Sr, Pb), melt inclusions display much smaller variations than their host rocks. Conclusions A simple but accurate approach for in situ analysis of trace elements in melt inclusions by LA-ICP-SF-MS has been established, which should greatly facilitate the wider application of in situ trace element geochemistry to melt inclusion studies.

Uniformity Analysis of Metal Coatings on Conductive Glass by Cryogenic-Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry

Dried droplet calibration approach for the analysis of inorganic nonmetallic materials by laser ablation-inductively coupled plasma-mass spectrometry

[Progress in the application of laser ablation ICP-MS to surface microanalysis in material science]

In situ determination of trace elements in melt inclusions using laser ablation-inductively coupled plasma-sector field-mass spectrometry.

Cryogenic Laser Ablation in a Rapid Cooling Chamber Ensures Excellent Elemental Imaging in Fresh Biological Tissues.

Quantitative Analysis of Trace Elements in Geological Materials by Laser Ablation Icpms: Instrumental Operating Conditions and Calibration Values of Nist Glasses

Simple strategy to suppress the thermal effect for multi-element analysis in sulfide minerals by LA-ICP-MS with a cryogenic ablation cell

Contrasting Matrix Induced Elemental Fractionation in NIST SRM and Rock Glasses During Laser Ablation ICP-MS Analysis at High Spatial Resolution

Study on Ablation Behaviors and Ablation Rates of a 193nm ArF Excimer Laser System for Selected Substrates in LA-ICP-MS Analysis

High-repetition-rate laser ablation for elemental analysis in an inductively coupled plasma with acoustic wave normalization

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

Quantitative Imaging Analysis and Investigation of Transmission Loss in PbF2 Crystals by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Method.

Surface Elemental Microanalysis With Submicron Lateral Resolution By The Laser-Ablation Laser-Induced Fluorescence Technique

Analysis of 42 Major and Trace Elements in Glass Standard Reference Materials by 193nm LA-ICPMS.

Simultaneous measurement of major, trace elements and Pb isotopes in silicate glasses by laser ablation quadrupole and multi-collector inductively coupled plasma mass spectrometry

Using Laser-Induced Breakdown Spectroscopy on Vacuum Alloys-Production Process for Elements Concentration Analysis

One-Point and Multiline Calibration Fiber-Optic Laser-Ablation Spark-Induced Breakdown Spectroscopy for Quantitative Analysis of Elements in Aluminum Alloys

Quantitative Elemental Analysis Of Aluminum Alloys With One-Point Calibration High Repetition Rate Laser-Ablation Spark-Induced Breakdown Spectroscopy

A New Analytical Mode and Application of the Laser Ablation Inductively Coupled Plasma Mass Spectrometer in the Earth Sciences

Optical Scanning Analysis of Static Samples by Compact Laser Induced Breakdown Spectroscopy

Standardless Semi-quantitative Elemental Analysis of Steel Using Laser Ablation Time-of-flight Mass Spectrometry