Abstract:The coupling of a laser ablation microprobe (LAM) to a multi-collector ICP-MS has enabled the development of highprecision in situ isotope ratio analysis. Like other microanalytical techniques, laser ablation MC-ICPMS provides the benefit of high spatial resolution and produces data that can be integrated with microstructural and other geochemical datasets. Despite the advances in recent years there remains a perception that the accuracy and precision of the in situ measurements suffer in comparison to solution measurements because of matrix effects and isobaric interferences. In addition to corrections for mass bias and isobaric/molecular interferences the precision of an individual measurement is primarily a function of the number of ions counted and therefore depends on the concentration of the element in the mineral, the size of the laser pit, the sensitivity of the mass spectrometer and the counting time. Signals produced by laser ablation are transient, but operating conditions for the laser can be chosen to achieve near steadystate signals. Frequency, laser fluence and spot size settings all contribute to signal stability and intensity. Instrument sensitivity is not a problem for isotopic systems where the element is a major constituent of the mineral (e.g. Mg in olivine, Fe in pyrite). Significant limitations remain in the measurement of isotopic ratios of trace elements in common minerals and in many cases the best precision has been obtained at the expense of spatial resolution (effectively using the laser as a solid sampling tool) or limited to minerals with very low parent/daughter ratios. Ablation time and hence counting time can be limited by the size of the mineral grain and the calculation of the precision of individual measurements should take this into account. The use of ion counters in combination with Faraday detectors or multipleion counting systems can extend the measurements to smaller ion beam intensities, thereby making it possible to use smaller spot sizes or measure lower concentrations. Although the precision of individual measurements using ion counters can approach the theoretical precision, external reproducibility is dependent on long-term detector stability and gain calibration. Melt Inclusions as a recorder of crustal assimilation processes DAVID W. PEATE*, JAY THOMPSON, MICHAEL C. ROWE, INGRID UKSTINS PEATE AND ADAM J.R. KENT Department of Geoscience, University of Iowa, Iowa City, IA 52242, USA (*correspondence: david-peate@uiowa.edu) Department of Geosciences, Oregon State University, Corvallis, OR 97331, USA

Quantitative Analysis of Trace Elements in Geological Materials by Laser Ablation Icpms: Instrumental Operating Conditions and Calibration Values of Nist Glasses

Quantitative analysis of trace element abundances in glasses and minerals: a comparison of laser ablation inductively coupled plasma mass spectrometry, solution inductively coupled plasma mass spectrometry, proton microprobe and electron microprobe data

Analysis of 42 Major and Trace Elements in Glass Standard Reference Materials by 193nm LA-ICPMS.

LA-ICP-MS ANALYSIS OF TRACE ELEMENTS IN SILICATE MINERALS ON ICP-MS NEXION 300S MASS SPECTROMETER WITH NWR 213 ATTACHMENT FOR LASER ABLATION: METHODOLOGICAL ASPECTS

Contrasting Matrix Induced Elemental Fractionation in NIST SRM and Rock Glasses During Laser Ablation ICP-MS Analysis at High Spatial Resolution

Precision of in Situ Isotope Ratio Measurements by Lam-Mc-Icpms

In situ determination of trace elements in melt inclusions using laser ablation-inductively coupled plasma-sector field-mass spectrometry.

Simultaneous measurement of major, trace elements and Pb isotopes in silicate glasses by laser ablation quadrupole and multi-collector inductively coupled plasma mass spectrometry

Non-Matrix-Matched 9 Μm U-Pb Dating of Zircon Using Excimer Laser Ablation ICP-MS

High-Precision Measurement of Eu/Eu* in Geological Glasses Via La-Icp-Ms Analysis

In Situ Analysis of Mg Isotopic Compositions of Basalt Glasses by Femtosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

Combined use of multiple external and internal standards in LA-ICP-MS analysis of bulk geological samples using lithium borate fused glass

Non-matrix-matched calibration in bulk multi-element laser ablation – Inductively coupled plasma – Mass spectrometry analysis of diverse materials

High spatial resolution trace element determination of geological samples by laser ablation quadrupole plasma mass spectrometry: implications for glass analysis in volcanic products

Improved in situ Sr isotopic analysis by a 257 nm femtosecond laser in combination with the addition of nitrogen for geological minerals

Determination Of Forty Two Major And Trace Elements In Usgs And Nist Srm Glasses By Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry

Precise and Accurate in Situ Determination of Lead Isotope Ratios in NIST, USGS, MPI‐DING and CGSG Glass Reference Materials Using Femtosecond Laser Ablation MC‐ICP‐MS

Dried droplet calibration approach for the analysis of inorganic nonmetallic materials by laser ablation-inductively coupled plasma-mass spectrometry

The Analysis of Ores by Laser Ablation and Ionization Time-of-Flight Mass Spectrometer and Technique Comparison

The Uncertainty Budget of the Multi-Element Analysis of Glasses Using La-Icp-Ms

Quantitative Imaging Analysis and Investigation of Transmission Loss in PbF2 Crystals by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Method.