Abstract:The isotopic composition of sulfur is a vital tracer used in the Earth and planetary sciences. In this study, the laser-and ICP-induced isotopic fractionation in S-rich minerals (sulfides and elemental S) with different matrices was investigated by using 257 nm femtosecond (fs) and 193 nm ArF excimer nanosecond (ns) laser ablation systems coupled to a Neptune Plus MC-ICP-MS. Compared to ns-LA-MC-ICP-MS, higher sensitivity (1.4-2.4 times) under similar instrumental conditions and better precision (similar to 1.6-fold) under the same signal intensity condition were achieved by fs-LA-MC-ICP-MS. In addition, a fs-laser provides less fluence and matrix dependent S isotopic fractionation, and more stable transient isotopic ratios compared to a ns-laser. Better results acquired by fs-LA-MC-ICP-MS were attributed to the smaller size of particles and less thermal effect produced by using the fs-laser, which were evidenced by the morphologies of the ablation craters and ejected aerosol particles of P-S-1 (the pressed powder pellet of IAEA-S-1) and PPP-1 (a pyrite single crystal from the Sukhoi Log deposit). The ICP-induced isotopic fractionation (matrix effect) was still found in fs-LA-MC-ICP-MS under the maximum sensitivity conditions. However, a significant reduction of the matrix effect was obtained under robust plasma conditions at a lower makeup gas flow rate (0.52-0.54 l min(-1)) relative to the maximum sensitivity condition (0.6 l min(-1)) for S isotope analysis. This could be ascribed to the particles that not only pass into the higher temperature ICP for a longer residence time at a lower makeup gas flow rate that resulted in more efficient vaporization of the particles, but also experience a more robust plasma induced by adding 4-6 ml min(-1) N-2 into the plasma. Furthermore, under the robust conditions, the results of six reference materials with different matrices obtained by fs-LA-MC-ICP-MS with non-matrix matched calibration with a spot size of 20-44 mm showed excellent agreement with the reference values (the accuracy of 0.01-0.15 parts per thousand for delta S-34 and 0.11-0.45 parts per thousand for delta S-33 and the precision of 0.16-0.40 parts per thousand (2 s) for delta S-34 and 0.35-0.78 parts per thousand (2 s) for delta S-33) and the mass-dependent fractionation line, validating the applicability of the proposed approach for providing high-quality in situ isotope data (delta S-33 and delta S-34) of sulfides and elemental sulfur at high spatial resolution using non-matrix matched analysis.

Simple strategy to suppress the thermal effect for multi-element analysis in sulfide minerals by LA-ICP-MS with a cryogenic ablation cell

Uniformity Analysis of Metal Coatings on Conductive Glass by Cryogenic-Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry

Elemental Signal Response of Sulfide Minerals in LA-ICP-MS Microanalysis

Simple and Cost-Effective Methods for Precise Analysis of Trace Element Abundances in Geological Materials with ICP-MS

In situ determination of trace elements in melt inclusions using laser ablation-inductively coupled plasma-sector field-mass spectrometry.

A Flux‐Free Fusion Technique for Rapid Determination of Major and Trace Elements in Silicate Rocks by LA‐ICP‐MS

Cryogenic Laser Ablation in a Rapid Cooling Chamber Ensures Excellent Elemental Imaging in Fresh Biological Tissues.

LA-ICP-MS ANALYSIS OF TRACE ELEMENTS IN SILICATE MINERALS ON ICP-MS NEXION 300S MASS SPECTROMETER WITH NWR 213 ATTACHMENT FOR LASER ABLATION: METHODOLOGICAL ASPECTS

High-repetition-rate laser ablation for elemental analysis in an inductively coupled plasma with acoustic wave normalization

Accurate determination of sulfur isotopes (delta S-33 and delta S-34) in sulfides and elemental sulfur by femtosecond laser ablation MC-ICP-MS with non-matrix matched calibration

Dried droplet calibration approach for the analysis of inorganic nonmetallic materials by laser ablation-inductively coupled plasma-mass spectrometry

A Novel Laser Ablation Chamber for Microwave Plasma Atomic Emission Spectrometry and Its Application

Accurate determination of sulfur isotopes (δ33S and δ34S) in sulfides and elemental sulfur by femtosecond laser ablation MC-ICP-MS with non-matrix matched calibration

Combined use of multiple external and internal standards in LA-ICP-MS analysis of bulk geological samples using lithium borate fused glass

Contrasting Matrix Induced Elemental Fractionation in NIST SRM and Rock Glasses During Laser Ablation ICP-MS Analysis at High Spatial Resolution

Sensitive Elemental Analysis with High Repetition Rate Laser-Ablation Spark-Induced Breakdown Spectroscopy Combined with Lock-in Signal Detection

Investigation of Nitrogen Addition, Position Effect and Mismatch Intensity Effect in Li Isotopic Analysis by Nanosecond Laser Ablation Multi-Collector Inductively Coupled Plasma Mass Spectrometry

Direct Quantitative Analysis of Fluorine in Solid Samples by Cryogenic Laser Ablation and Ionization Time-of-Flight Mass Spectrometry.

Quantitative Elemental Analysis of Bismuth Brass by Microchip Laser-Ablation Spark-Induced Breakdown Spectroscopy

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

Single-cell Elemental Analysis Via High Irradiance Femtosecond Laser Ionization Time-of-flight Mass Spectrometry.