Abstract:It has been shown that an increase in sensitivity and selectivity of detection of an analyte can be achieved by tuning the ablation laser wavelength to match that of a resonant gas-phase transition of that analyte. This has been termed resonant laser ablation (RLA). For a pulsed tunable nanosecond laser, the data presented here illustrate the resonant enhancement effect in pure copper and aluminum samples, chromium oxide thin films, and for trace molybdenum in stainless steel samples, and indicate two main characteristics of the RLA phenomenon. The first is that there is an increase in the number of atoms ablated from the surface. The second is that the bandwidth of the wavelength dependence of the ablation is on the order of 1 nm. The effect was found to be virtually identical whether the atoms were detected by use of a microwave-induced plasma with atomic emission detection, by an inductively coupled plasma with mass spectrometric detection, or by observation of the number of laser pulses required to penetrate through thin films. The data indicate that a distinct ablation laser wavelength dependence exists, probably initiated via resonant radiation trapping, and accompanied by collisional broadening. Desorption contributions through radiation trapping are substantiated by changes in crater morphology as a function of wavelength and by the relatively broad linewidth of the ablation laser wavelength scans, compared to gas-phase excitation spectra. Also, other experiments with thin films demonstrate the existence of a distinct laser-material interaction and suggest that a combination of desorption induced by electronic transition (DIET) with resonant radiation trapping could assist in the enhancement of desorption yields. These results were obtained by a detailed inspection of the effect of the wavelength of the ablation laser over a narrow range of energy densities that lie between the threshold of laser-induced desorption of species and the usual analytical ablation regime. Normal ablation employs high-power lasers in an attempt to create a vapor plume without selective vaporization, and with a stoichiometry that accurately represents the stoichiometry of species in the solid sample. RLA, as a method of selective vaporization, appears to provide an opportunity to exploit selective vaporization in new ways.

High-repetition-rate laser ablation for elemental analysis in an inductively coupled plasma with acoustic wave normalization

A Novel Laser Ablation Chamber for Microwave Plasma Atomic Emission Spectrometry and Its Application

Sensitive Elemental Analysis with High Repetition Rate Laser-Ablation Spark-Induced Breakdown Spectroscopy Combined with Lock-in Signal Detection

Application of Fiber Optic High Repetition Rate Laser-Ablation Spark-Induced Breakdown Spectroscopy on the Elemental Analysis of Aluminum Alloys

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

Pre-ablation pulse laser-inducted breakdown spectroscopy technology for enhanced ablation and emission plasma

Multiplexed elemental bioimaging with quadrupole ICP-MS and high-frequency laser ablation systems

New Approach for Near-Real-Time Measurement of Elemental Composition of Aerosol Using Laser-Induced Breakdown Spectroscopy

A New Analytical Mode and Application of the Laser Ablation Inductively Coupled Plasma Mass Spectrometer in the Earth Sciences

Ultra-Micro Analysis of Liquids and Suspensions Based on Laser-Induced Plasma Emissions

Resonant laser ablation of metals detected by atomic emission in a microwave plasma and by inductively coupled plasma mass spectrometry.

Femtosecond laser-ablation spark-induced breakdown spectroscopy and its application to the elemental analysis of aluminum alloys

High-throughput Underwater Elemental Analysis by J-laser-induced Breakdown Spectroscopy at Khz Repetition Rates: Part I, Ultrasound-Enhanced Optical Emission Spectroscopy Towards Application Perspectives

Sensitive Elemental Analysis of Aqueous Colloids by Laser-Induced Plasma Spectroscopy

Improved Detection Sensitivity of Elements in Solids Via Laser Postionization in Laser Desorption Time-of-flight Mass Spectrometry

Surface Elemental Microanalysis With Submicron Lateral Resolution By The Laser-Ablation Laser-Induced Fluorescence Technique

Dried droplet calibration approach for the analysis of inorganic nonmetallic materials by laser ablation-inductively coupled plasma-mass spectrometry

Approaching Standardless Quantitative Elemental Analysis of Solids: Microsecond Pulsed Glow Discharge and Buffer-Gas-Assisted Laser Ionization Time-of-Flight Mass Spectrometry

Single-Shot Elemental Analysis of Liquids Based on Laser Vaporization at Fluences Below Breakdown

Progress of laser ionization mass spectrometry for elemental analysis — A review of the past decade

A small high-irradiance laser ionization time-of-flight mass spectrometer.