Abstract:Bismuth brass has very good mechanical properties and is friendly to environment. Therefore, it can be widely used in different fields. In order to realize the convenient, rapid and sensitive elemental analysis of trace elements in bismuth brass, fiber laser based high repetition rate laser-ablation spark-induced breakdown spectroscopy (HRR LA-SIBS) is developed. In the experiments, a compact fiber laser operated at 5 kHz pulse repetition rate is used to ablate the sample and produce plasma, and the spark discharge is used to further break down the ablated sample and enhance the plasma emission for sensitive elemental analysis. A compact fiber-optic spectrometer coupled with non-intensified charge-coupled device (CCD) is used to record the spectra. Bismuth, lead and tin in several bismuth brass standard samples are quantitatively analyzed. The plasma temperature is determined to be about 7962 +/- 300 K by using the Boltzmann plots of copper, zinc and tin elements; the electron density is determined to be about 1.049 x 10(-17 )cm(-3) based on the Stark broadening of Cu (I) 510.47 nm analytical line. The plasma is determined to be in local thermodynamic equilibrium (LTE) state according to McWhirter criterion as well as appended criteria for transient plasma. Under the present experimental condition, the calibration curves of bismuth, lead and tin in bismuth brass are built with fitting goodness of higher than 95%. The detection limits of bismuth, lead and tin are determined to be 25.5 ppm, 64.2 ppm and 316.5 ppm, respectively. The weak transition probability of tin atoms leads to worse detection limit of tin than the scenarios of bismuth and lead. The ways to further improve the analytical sensitivity and minimize system dimensions are discussed in this article. It is demonstrated that high repetition rate laser-ablation spark-induced breakdown spectrometer based on compact fiber laser as well as compact fiber-optic spectrometer can be used to realize the convenient, rapid and sensitive elemental analysis of trace elements in bismuth brass. This study is also helpful in analyzing the trace harmful elements, including bismuth, lead and tin in high temperature alloys with HRR LA-SIBS. In comparison with laser-induced breakdown spectroscopy (LIBS), the HRR LA-SIBS technique has several intrinsic advantages, such as fast spectral data collection speed, cost-effective system and low continuum background and so on. This technique is very useful in implementing the elemental analysis of different alloy samples and can be potentially used in metallurgical industry in the future.

Quantitative Imaging Analysis and Investigation of Transmission Loss in PbF2 Crystals by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Method.

Precise and Accurate in Situ Determination of Lead Isotope Ratios in NIST, USGS, MPI‐DING and CGSG Glass Reference Materials Using Femtosecond Laser Ablation MC‐ICP‐MS

Simultaneous measurement of major, trace elements and Pb isotopes in silicate glasses by laser ablation quadrupole and multi-collector inductively coupled plasma mass spectrometry

Non-Matrix-Matched 9 Μm U-Pb Dating of Zircon Using Excimer Laser Ablation ICP-MS

Determination of Lead Isotope Compositions of Geological Samples Using Femtosecond Laser Ablation MC-ICPMS

High spatial resolution quantitative elemental imaging of foraminifer by laser ablation-inductively coupled plasma-mass spectrometry

Quantitative Analysis of Trace Elements in Geological Materials by Laser Ablation Icpms: Instrumental Operating Conditions and Calibration Values of Nist Glasses

In situ determination of trace elements in melt inclusions using laser ablation-inductively coupled plasma-sector field-mass spectrometry.

Dried droplet calibration approach for the analysis of inorganic nonmetallic materials by laser ablation-inductively coupled plasma-mass spectrometry

Contrasting Matrix Induced Elemental Fractionation in NIST SRM and Rock Glasses During Laser Ablation ICP-MS Analysis at High Spatial Resolution

Quantitative analysis of trace element abundances in glasses and minerals: a comparison of laser ablation inductively coupled plasma mass spectrometry, solution inductively coupled plasma mass spectrometry, proton microprobe and electron microprobe data

Simultaneous Determination of Trace Elements and Lead Isotopes in Fused Silicate Rock Powders Using a Boron Nitride Vessel and fsLA-(MC)-ICP-MS

A Practical Method for Accurate Measurement of Trace Level Fluorine in Mg‐ and Fe‐Bearing Minerals and Glasses Using Electron Probe Microanalysis

Simultaneous in Situ Determination of Pb Isotope Ratios and Trace Element Concentrations in Melt Inclusions by LASS‐ICP‐MS

Quantitative Analysis Of Trace Elements In Bismuth Brass With High Repetition Rate Laser-Ablation Spark-Induced Breakdown Spectrum

Elemental Imaging Method Based on a Dielectric Barrier Discharge Probe Coupled with Inductively Coupled Plasma Mass Spectrometry

Improved in situ analysis of lead isotopes in low-Pb melt inclusions using laser ablation-multi-collector-inductively coupled plasma-mass spectrometry

Accurate and Precise in Situ Determination of Beryllium Contents in Beryllium Minerals Using Ablation Spot Size of 13 Μm by LA–ICP–MS

Combined use of multiple external and internal standards in LA-ICP-MS analysis of bulk geological samples using lithium borate fused glass

Quantitative Analysis of Elemental Concentrations of Aluminum Alloys Using Calibration-Free Femtosecond Laser-Ablation Spark-Induced Breakdown Spectroscopy

Simultaneous Determinations of U–Pb Age, Hf Isotopes and Trace Element Compositions of Zircon by Excimer Laser-Ablation Quadrupole and Multiple-Collector ICP-MS