Abstract:Laser-induced breakdown spectroscopy (LIBS), an element-detection technology with the advantages of no sample preparation and in situ detection of metal samples, is suitable for the quantitative analysis of metal samples. However, severe spectral interference in the detection of metal samples makes the quantitative analysis difficult. Three quantitative analysis methods, including single-variable calibration, partial least squares regression (PLSR), and support vector regression (SVR), are used to conduct the quantitative analysis of four common metal elements (Manganese (Mn), Chromium (Cr), Vanadium (V), and Titanium (Ti)). The PLSR model adds interference spectrum lines to the model for linear modeling, while the SVR model adds interference spectrum lines to the model for nonlinear modeling. The quantitative analysis results of the nonlinear SVR model are the best. The R square (R2) values of Mn, Cr, V, and Ti are 0.993, 0.995, 0.990, and 0.992, respectively. The root-mean-squared errors of the prediction set of Mn, Cr, V, and Ti are 0.044, 0.045, 0.011, and 0.014, respectively. Therefore, the results of PLSR and SVR are better than the calibration curves of the spectral intensity and concentration due to the influence of multivariate factors. SVR has almost no element bias, while PLSR and the single-variable calibration model have different quantitative results due to the different degrees of influence on spectral lines. These results demonstrate that the combined influence of the spectral interference, background noise, and self-absorption can be suppressed by the nonlinear quantitative analysis model in the steel field using LIBS.

Standardless Semi-quantitative Elemental Analysis of Steel Using Laser Ablation Time-of-flight Mass Spectrometry

Applicability of standardless semiquantitative analysis of solids by high-irradiance laser ionization orthogonal time-of-fight mass spectrometry.

[Real-Time, Quantitative Analysis of Multi-Elements in Liquid Steel by LIBS].

Semiquantitative Multielemental Analysis of Biological Samples by a Laser Ionization Orthogonal Time-of-flight Mass Spectrometer.

Approaching Standardless Quantitative Elemental Analysis of Solids: Microsecond Pulsed Glow Discharge and Buffer-Gas-Assisted Laser Ionization Time-of-Flight Mass Spectrometry

A preliminary comparison of time-of-flight laser ionization and secondary ion mass spectrometry in solids analysis

Determination of Molybdenum, Nickel, and Chromium in Low-alloy Steels Using Laser-induced Breakdown Spectroscopy Assisted with Laser-induced Fluorescence and Discrete Wavelet Transform

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

Multielement simultaneous quantitative analysis of trace elements in stainless steel via full spectrum laser-induced breakdown spectroscopy

Multivariate Quantitative Analysis of Metal Elements in Steel Using Laser-Induced Breakdown Spectroscopy

Elemental Imaging Via Laser Ionization Orthogonal Time-of-Flight Mass Spectrometry

Quantitative Analysis of Elemental Concentrations of Aluminum Alloys Using Calibration-Free Femtosecond Laser-Ablation Spark-Induced Breakdown Spectroscopy

Using Laser-Induced Breakdown Spectroscopy on Vacuum Alloys-Production Process for Elements Concentration Analysis

Portable Fiber-Optic Laser-Induced Breakdown Spectroscopy System for the Quantitative Analysis of Minor Elements in Steel

Multi-Element Detection in Molten Steel with Laser-Induced Breakdown Spectroscopy

A small high-irradiance laser ionization time-of-flight mass spectrometer.

Optical Scanning Analysis of Static Samples by Compact Laser Induced Breakdown Spectroscopy

Laser ablation and ionization time-of-flight mass spectrometer with orthogonal sample introduction and axial field rf-only quadrupole cooling

Lens-to-sample Distance Effect on the Quantitative Analysis of Steel by Laser-Induced Breakdown Spectroscopy

Quantitative Analysis of Nonmetal Elements in Steel Using Laser-Induced Breakdown Spectroscopy Combined with Random Forest

Experimental elemental content analysis in metal materials by laser-induced plasma spectroscopy