Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

&Lt;title>research for Polyimide As a Sacrificial Layer in MEMS Device</title>

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Polyimide sacrificial layer for micromachining

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Polyimide as a versatile enabling material for microsystems fabrication: surface micromachining and electrodeposited nanowires integration

Experimental Investigations Of Porous Silicon Sacrificial Layer Techniques On Mems

Polyimide-Damage-Free, CMOS-Compatible Removal of Polymer Residues from Deep Reactive Ion Etching Passivation

Mesoporous polyetherimide thin films via hydrolysis of polylactide-b-polyetherimide-b-polylactide

Key Technology of Micromachined Temperature Sensor Arrays on Polyimide Flexible Substrates

Fast MEMS Releasing with Polymer and Nano-Graphite Particle Additive

The Technology of Using Porous Silicon As a Sacrificial Layer in MEMS

Progress in Preparation of Low Dielectric Constant Polyimide by Chemical Method

Studies of Etching Mechanism of Polyimide Films on Silicon Chips

The Sacrificial Layer Releasing of Micro-Machined Optical-Fiber Switch with Poly-Si Torsion Mirror

Synthesis and Studies of Polyimide

Fabrication of Switches on Polymer-Based by Hot Embossing

Preparation of Nanoporous Polyimide Thin Films Via Layer-By-Layer Self-Assembly of Cowpea Mosaic Virus and Poly(Amic Acid)

Micro-crosslinked polyimide nanocomposites with low dielectric constant and low dielectric loss for microwave antenna with molecular dynamics

Crosslinked PMMA as a Low-Dimensional Dielectric Sacrificial Layer for MEMS/NEMS and Quantum Nanostructures Fabrication

Bonding Packaging Of A Sp4t Rf Mems Switch

Resistive switching characteristics of polyimides derived from 2,2'-aryl substituents tetracarboxylic dianhydrides

&Lt;title&gt;research for Polyimide As a Sacrificial Layer in MEMS Device&lt;/title&gt;