Abstract:An essential ruggedness of power devices is the capability of safely withstanding the surge energy. The surge ruggedness of the GaN high-electron-mobility transistor (HEMT), a power transistor with no or minimal avalanche capability, has not been fully understood. This article unveils the comprehensive physics associated with the surge-energy withstand process and the failure mechanisms of p-gate GaN HEMTs. Two commercial p-gate GaN HEMTs with Ohmic- and Schottky-type gate contacts are studied. Two circuits are developed to study the device surge ruggedness: an unclamped inductive switching circuit is first used to identify the withstand dynamics and failure mechanisms, and a clamped inductive switching circuit with a controllable parasitic inductance is then designed to mimic the surge energy in converter-like switching events. The p-gate GaN HEMT is found to withstand the surge energy through a resonant energy transfer between the device capacitance and the load/parasitic inductance rather than a resistive energy dissipation as occurred in the avalanche. If the device resonant voltage goes below zero, the device reversely turns on and the inductor is discharged. The device failure occurs at the transient of peak resonant voltage and is limited by the device overvoltage capability rather than the surge energy, dV/dt, or overvoltage duration. Almost no energy is dissipated in the resonant withstand process and the device failure is dominated by an electric field rather than a thermal runaway. These results provide critical understandings on the ruggedness of GaN HEMTs and important references for their qualifications and applications.

A GaN Lateral Bidirectional ESD Clamp Based on the Floating-Gate MBS and a Regulating Capacitor

A Novel Gate-to-Source ESD Protection Clamp for GaN HEMT

A Novel Bidirectional AlGaN/GaN ESD Protection Diode

Experimental Demonstration of an Integrated Bidirectional Gate ESD Protection Structure for P-Gan Power HEMTs

Experimental Investigation and Model Analysis on a GaN Electrostatic Discharge Clamp

The ESD Behavior of D-Mode GaN MIS-HEMT

A Robust Scalable ESD Protection Device integrating Drain side Floating P+ Diffusion with tunable ESD Design Window and effective Latch-up immunity for High-Voltage Power Clamp applications

The ESD Behavior of Enhancement GaN HEMT Power Device with p-GaN Gate Structure

Simulation Study of a High Gate-to-Source ESD Robustness Power P-Gan HEMT with Self-Triggered Discharging Channel

ESD HBM Discharge Model in RF GaN-on-Si (MIS)HEMTs

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

All-WBG Cascode Device with p-GaN Gate HEMT and SiC JFET for High-Frequency and High-Temperature Power Switching Applications

Virtual-Body P-Gan Gate HEMT with Enhanced Ruggedness Against Hot-Electron-Induced Degradation

GaN-on-Si lateral power devices with symmetric vertical leakage: The impact of floating substrate

Suppressing Buffer-Induced Current Collapse in GaN HEMTs with a Source-Connected P-Gan (SCPG): A Simulation Study

A Comparative Study on G-to-S ESD Robustness of the Ohmic-Gate and Schottky-Gate p-GaN HEMTs

Electrostatic Discharge (ESD) Behavior of P-Gan HEMTs

ON-state Human Body Model ESD Failure Mechanisms in GaN-on-Si RF MIS-HEMTs

A CMOS-Compatible Process for ≥3 kV GaN Power HEMTs on 6-inch Sapphire Using In Situ SiN as the Gate Dielectric

Fully Integrated GaN-on-Silicon Power-Rail ESD Clamp Circuit Without Transient Leakage Current During Normal Power-on Operation

Surge-Energy and Overvoltage Ruggedness of P-Gate GaN HEMTs