Abstract:The quest for higher modulation speed and lower energy consumption has inevitably promoted the rapid development of semiconductor-based solid lighting devices in recent years. GaN-based light-emitting diodes (LEDs) have emerged as promising candidates for achieving high efficiency and high intensity, and have received increasing attention among many researchers in this field. In this paper, we use a self-assembled array-patterned mask to fabricate InGaN/GaN multi-quantum well (MQW) LEDs with the intention of enhancing the light-emitting efficiency. By utilizing inductively coupled plasma etching with a self-assembled Ni cluster as the mask, nanopillar arrays are formed on the surface of the InGaN/GaN MQWs. We then observe the structure of the nanopillars and find that the V-defects on the surface of the conventional structure and the negative effects of threading dislocation are effectively reduced. Simultaneously, we make a comparison of the photoluminescence (PL) spectrum between the conventional structure and the nanopillar arrays, achieved under an experimental set-up with an excitation wavelength of 325 mm. The analysis demonstrates that MQW-LEDs with nanopillar arrays achieve a PL intensity 2.7 times that of conventional LEDs. In response to the PL spectrum, some reasons are proposed for the enhancement in the light-emitting efficiency as follows: 1) the improvement in crystal quality, namely the reduction in V-defects; 2) the roughened surface effect on the expansion of the critical angle and the attenuated total reflection; and 3) the enhancement of the light-extraction efficiency due to forward scattering by surface plasmon polariton modes in Ni particles deposited above the p-type GaN layer at the top of the nanopillars.

Performance Enhancement of Nitrogen-Polar GaN-based Light-Emitting Diodes Prepared by Metalorganic Chemical Vapor Deposition

Enhanced Performance of N-polar AlGaN-based Deep-Ultraviolet Light-Emitting Diodes.

Characteristics Of Polarization-Doped N-Face Iii-Nitride Light-Emitting Diodes

Green LED Development in Polar and Non-Polar Growth Orientation

Performance Enhancement of Ingan-Based Light-Emitting Diodes with Ingan/Alinn/Ingan Composition-Graded Barriers

Significantly improved surface morphology of N-polar GaN film grown on SiC substrate by the optimization of V/III ratio

Enhancement of Light-Emission Efficiency of Ultraviolet InGaN/GaN Multiple Quantum Well Light Emitting Diode with InGaN Underlying Layer

Enhancing the Performance of GaN-Based Light-Emitting Diodes by Incorporating a Junction-Type Last Quantum Barrier

Efficiency enhancement mechanism of piezoelectric effect in long-wavelength InGaN-based LED

Growth of III-Nitride Materials and Blue Light-Emitting Diodes by Metal Organic Vapor Phase Epitaxy

Enhanced ultraviolet electroluminescence performance from p-NiO/n-GaN heterojunctions by using i-Ga2O3 as electron blocking layer

Polarized Emission From InGaN/GaN Single Nanorod Light-Emitting Diode

Polarization Modification In Ingan/Gan Multiple Quantum Wells By Symmetrical Thin Low Temperature-Gan Layers

Monolithic Semi-Polar ( 1 1 ¯ 01 ) InGaN/GaN Near White Light-Emitting Diodes on Micro-Striped Si (100) Substrate*

The Enhancement of Light-Emitting Efficiency Using GaN-based Multiple Quantum Well Light-Emitting Diodes with Nanopillar Arrays

Impurity Resonant State P-Doping Layer for High-Efficiency Nitride-Based Light-Emitting Diodes

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Excavating the Communication Performance in GaN-Based Green Micro-LEDs: Modular-Architectured p-Type Region

Designs of InGaN Micro-LED Structure for Improving Quantum Efficiency at Low Current Density

Demonstration of Weak Polarization Electric Field III-N LEDs Based on Polar Plane

Performance Improvement of InGaN Red Light‐Emitting Diode by Using V‐Pits Layer and Step‐Graded GaN Barrier