Abstract:In this paper, TiC/Al 3 Ti/Al 2 O 3 composite nanoparticles were prepared using Ti, Al, and graphite powders, in a NaCl-KCl molten salt medium. The prepared powders were characterised by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS). The results showed that the one-step method could only directly generate the AlTi 2 C phase, but could not generate the TiC/Al 3 Ti/Al 2 O 3 phase. In the two-step method, the Al, Al 3 Ti, Al 2 Ti, and AlTi phases were used as precursors, and then the graphite powder was added. After sintering at 1000°C for 3 h, the TiC/Al 3 Ti/Al 2 O 3 composite nano-powder was successfully prepared, which can be used as the reinforcement of Al-based composites. During the synthesis process of the TiC/Al 3 Ti/Al 2 O 3 composite nano-powder, the intermediate AlTi 2 C phase was generated first, and the exposed [Ti] in the AlTi 2 C phase adsorbed C to generate the TiC phase. The formation of the TiC phase promoted the decomposition of the AlTi 2 C phase, resulting in the formation of the Al 3 Ti phase. Finally, the residual Al phase in the molten salt was oxidised to the Al 2 O 3 phase during the washing process. Dans cet article, on a préparé des nanoparticules composites de TiC/Al 3 Ti/Al 2 O 3 en utilisant des poudres de Ti, Al et de graphite, dans un milieu de sel fondu de NaCl-KCl. On a caractérisé les poudres préparées par diffraction des rayons x (DRX), microscopie électronique à balayage et spectroscopie à dispersion d'énergie (MEB-EDS) et spectroscopie de photoélectrons X (XPS). Les résultats ont montré que la méthode en une étape ne pouvait engendrer directement que la phase AlTi 2 C, mais ne pouvait pas engendrer la phase TiC/Al 3 Ti/Al 2 O 3 . Dans la méthode en deux étapes, on a utilisé les phases Al, Al 3 Ti, Al 2 Ti et AlTi comme précurseurs, et ensuite, on a ajouté la poudre de graphite. Après frittage à 1000°C pendant 3 h, on a préparé avec succès la nano-poudre composite TiC/Al 3 Ti/Al 2 O 3 , qui peut être utilisée comme le renforcement de composites à base d'Al. Pendant le procédé de synthèse de la nano-poudre composite TiC/Al 3 Ti/Al 2 O 3 , la phase intermédiaire AlTi 2 C a été engendrée en premier, et le [Ti] exposé dans la phase AlTi 2 C a adsorbé C pour engendrer la phase TiC. La formation de la phase TiC a favorisé la décomposition de la phase AlTi 2 C, amenant la formation de la phase Al 3 Ti. Finalement, la phase Al résiduelle dans le sel fondu a été oxydée en phase Al 2 O 3 pendant le procédé de lavage.

In-situ Synthesis of Cr3C2 Nanosheets by Carbon Reduction Route from Cr2AlC

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Synthesis of Nano Sized Cr2AlC Powders by Molten Salt Method

Observation on the Interface of Α-Al2o3/cr2o3: Prepared by Oxidation of Al45Cr7

Ternary-layered Cr2AlB2 synthesized from Cr, Al, and B powders by a molten salt-assisted method

An in Situ Dealloying and Oxidation Route to Co3O4 Nanosheets and Their Ambient‐Temperature CO Oxidation Activity

Microstructure evolution of Cr 2 AlC MAX phase under a graphite bed between 1100 °C and 1500 °C

Synthesis and characterization of submicro-sized V2AlC ceramics by a two-step modified molten salt method

In-situ synthesis of nano SiC particles in Al–Si–C system at 750 °C

Green preparation and synthesis mechanism of TiC/Al3Ti/Al2O3 composite nanoparticles

Preparation of 2D nitrogen-doped magnetic Fe3C/C by in-situ self-assembled double-template method for enhanced removal of Cr(VI)

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

Synthesis of WC-0.67wt.%Cr3C2 nanopowders by a one-step reduction-carbonization method and their characterization

The promoted photocatalytic performance of in-situ surface alkalinization of g-C3N4 for methylene blue and Cr(VI) in dye wastewater

Inhibition of Cr6+ by the formation of in-situ Cr3+ containing solid-solution in Al2O3–CaO–Cr2O3–SiO2 system

Facile synthesis of hollow Ti3AlC2 microrods in molten salts via Kirkendall effect

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Electrolytic synthesis of TiC/SiC nanocomposites from high titanium slag in molten salt

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Synthesis of Stoichiometric Titanium Carbide by a Combination of Carbothermal Reduction and Molten Salt Method and Its Characterization

Ordered Mesoporous Nanocrystalline Titanium‐Carbide/Carbon Composites from in Situ Carbothermal Reduction