Abstract:Hexagonal boron nitride (hBN) exhibits high thermal conductivity within the in-plane direction and significantly lower thermal conductivity in the cross-plane direction because of its anisotropic nature. When the texture properties of bulk hBN are strong, it is a potentially promising application area for the insulating heat spreaders and heat sinks. In this study, hBN was synthesized in situ with the spark plasma sintering (SPS) technique and the effects of sintering temperature on the orientation of hBN grains were investigated. The precursor was prepared by chemically reacting urea and boric acid in heat treatment at 850 °C. The hBN was produced using the previous precursor in a SPS at 1500, 1700, and 1900 °C. The samples were characterized using XRD, FTIR, SEM and Raman spectroscopy. The properties of the samples were further determined through measurements of density, DSC and thermal diffusivity. The hBN samples obtained through the SPS process have nano and micron-size grains. The hBN was highly crystalline and homogeneous, as determined by the XRD pattern, Raman spectra and Raman maps. The orientation of hBN grains has been revealed in the c-axis of hBN crystallites and was preferably arranged within a plane parallel to the SPS pressing direction. The hBN orientation preference index (IOP) value of −19925.5 at 1700 °C indicates the highest quality texture orientation. Increasing the temperature to 1900 °C decreased the orientation in the direction parallel to the pressing direction. The highest thermal conductivity calculated according to the thermal diffusivity perpendicular to the sintering pressure direction was 8.86 W m −1 K −1 at 1900 °C.

Preparation And Thermal Performance Of H-Bn/Ysz Composites

Thermal Conductivity of Ytterbia-Stabilized Zirconia

Ysz-Tin Composites with Good Electrical and Mechanical Properties Prepared by Spark Plasma Sintering

Sintering Behavior and Dielectric Property of BST-BSL Composite Ceramics

Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG

The investigation of synthesis and textured properties of in situ formed hBN with spark plasma sintering

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Preparation of h-BN-Based Textured Ceramics by Grain Rearrangement During Ultraviolet Curing Assisted Hot-Press Sintering

Mechanical Properties Of Sno2-Doped Ysz Ceramics

Preparation of highly oriented h-BN based textured ceramics via grain rearrangement under DLP printing and low-pressure sintering

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

The Properties of YSZ Electrolyte Sintering at 1300 °C

Preparation and Thermoelectric Properties of Polycrystalline Nonstoichiometric Yb14mnsb11 Zintl Compounds

Properties of YSZ Electrolyte Sintered at 1250°C

Effect Of H-Bn Content On The Sintering Properties Of Sic-Yag-Bn Multiphase Ceramics

YSZ fiber-reinforced porous YSZ ceramics with lowered thermal conductivity: Influence of the sintering temperature

Preparation and Properties of BN-SiO<sub>2</sub> Composite Ceramics

Fabrication of Pure T′ Phase YSZ Ceramics by Spark Plasma Sintering

A Novel Way to Fabricate Highly Porous Fibrous YSZ Ceramics with Improved Thermal and Mechanical Properties

Densification mechanism and corrosion resistance of h-BN/ZrO 2 ceramics prepared by spark plasma sintering

Effect of ZrO2 on sintering behavior and properties of h-BN/ZrO2 composites by spark plasma sintering