Abstract:Segmentation-crack structured yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs) were deposited by atmospheric plasma spraying (APS) using a Triplex ProTM-200 gun. In this work, free-standing coating specimens (~700 μm) were isothermally heat-treated in air from 1200 to 1600 °C for 24 h and at 1550 °C for 20 to 100 h, respectively. The thermal aging behaviors such as microstructures, phase compositions, grain growth and mechanical properties were characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscatter diffraction (EBSD) and a Vickers hardness test. The results indicated that the as-sprayed coatings mainly consisted of metastable tetragonal (t′-YSZ) phase, but the t′-YSZ gradually partitioned into equilibrium tetragonal (t-YSZ) and cubic (c-YSZ) phases due to yttrium diffusion during thermal exposure, and with an improvement in temperature, the c-YSZ may retain or transform into another yttrium-rich tetragonal (t′′-YSZ) phase. The transformation of t-YSZ to monoclinic phase (m-YSZ) has occurred after 1550 °C/40 h heat treatment, and the content of the m-YSZ phase increased with the prolongation of the thermal exposure time. The variations of Vickers hardness have a correlation with pores healing and grain growth, which might be attributed to the coating sintering and m-YSZ phase formation. Furthermore, the growth pattern of the grains was investigated in detail. In service, cracks and pores proceeded along the grain boundaries, especially surrounding the small grains. It is conducive to the engineering application of TBCs fabricated with the Triplex ProTM-200 gun.

Fabrication of Pure T′ Phase YSZ Ceramics by Spark Plasma Sintering

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Phase Transformation Behavior in Air Plasma Sprayed Yttria Stabilized Zirconia Coating

Influence of Annealing Temperature and Time on Phase Component of 8YSZ Powders Prepared by APS

The Properties of YSZ Electrolyte Sintering at 1300 °C

Spark Plasma Sintering and Characterization of 2Y-TZP Ceramics

The Propertied Of Ysz Electrolyte Sintering At 1300 Degrees Enc

Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material

Synthesis and Characteristics of Nanocrystalline YSZ by Homogeneous Precipitation and Its Electrical Properties

Heating and Melting State of YSZ Particles in Supersonic Atmospheric Plasma Spraying

Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats

Rapid processes for the production of nanocrystal yttria-stabilized tetragonal zirconia polycrystalline ceramics: ultrasonic spray pyrolysis synthesis and high-frequency induction sintering

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Degradation Analysis of YSZ Thermal Barrier Coatings

Study of Factors Influencing the Microstructure and Phase Content of Ultrafine Y-Tzp

Synthesis of yttria-stabilized zirconia powders for plasma spray by internal gelation

Improvement of Mechanical Strength of 8 mol % Yttria-Stabilized Zirconia Ceramics by Spark-Plasma Sintering

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

In-situ high temperature micromechanical testing of ultrafine grained yttria-stabilized zirconia processed by spark plasma sintering

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch

Study on the properties of YSZ electrolyte fabricated by plaster casting method