Abstract:Hexagonal boron nitride (hBN) exhibits high thermal conductivity within the in-plane direction and significantly lower thermal conductivity in the cross-plane direction because of its anisotropic nature. When the texture properties of bulk hBN are strong, it is a potentially promising application area for the insulating heat spreaders and heat sinks. In this study, hBN was synthesized in situ with the spark plasma sintering (SPS) technique and the effects of sintering temperature on the orientation of hBN grains were investigated. The precursor was prepared by chemically reacting urea and boric acid in heat treatment at 850 °C. The hBN was produced using the previous precursor in a SPS at 1500, 1700, and 1900 °C. The samples were characterized using XRD, FTIR, SEM and Raman spectroscopy. The properties of the samples were further determined through measurements of density, DSC and thermal diffusivity. The hBN samples obtained through the SPS process have nano and micron-size grains. The hBN was highly crystalline and homogeneous, as determined by the XRD pattern, Raman spectra and Raman maps. The orientation of hBN grains has been revealed in the c-axis of hBN crystallites and was preferably arranged within a plane parallel to the SPS pressing direction. The hBN orientation preference index (IOP) value of −19925.5 at 1700 °C indicates the highest quality texture orientation. Increasing the temperature to 1900 °C decreased the orientation in the direction parallel to the pressing direction. The highest thermal conductivity calculated according to the thermal diffusivity perpendicular to the sintering pressure direction was 8.86 W m −1 K −1 at 1900 °C.

Preparation of h-BN-Based Textured Ceramics by Grain Rearrangement During Ultraviolet Curing Assisted Hot-Press Sintering

Preparation of highly oriented h-BN based textured ceramics via grain rearrangement under DLP printing and low-pressure sintering

Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG

The effects of holding time on grain size, orientation degree and properties of h-BN matrix textured ceramics

Anisotropic properties of textured h-BN matrix ceramics prepared using 3Y2O3-5Al2O3(-4MgO) as sintering additives

Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics

Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics

Preparation and anisotropic properties of textured structural ceramics: A review

Ion sputtering erosion mechanisms of h-BN composite ceramics with textured microstructures

Study On The Textured Bnkt Ceramics By Reactive Templated Grain Growth

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Preparation of h-BN Ceramics by Reaction Sintering

Fabrication of textured (Hf0.2Zr0.2Ta0.2Cr0.2Ti0.2)B2 high-entropy ceramics

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Effects of cross-scale h-BN grains and orientation degree on the mechanical and thermal properties of BN-matrix textured ceramics

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

Fabrication and Electrical Properties of Textured Ba(Zr0.2Ti0.8)O3–(Ba0.7Ca0.3)TiO3 Ceramics Using Plate-Like BaTiO3 Particles As Templates

Effect Of H-Bn Content On The Sintering Properties Of Sic-Yag-Bn Multiphase Ceramics

The investigation of synthesis and textured properties of in situ formed hBN with spark plasma sintering