Abstract:Hexagonal boron nitride (hBN) exhibits high thermal conductivity within the in-plane direction and significantly lower thermal conductivity in the cross-plane direction because of its anisotropic nature. When the texture properties of bulk hBN are strong, it is a potentially promising application area for the insulating heat spreaders and heat sinks. In this study, hBN was synthesized in situ with the spark plasma sintering (SPS) technique and the effects of sintering temperature on the orientation of hBN grains were investigated. The precursor was prepared by chemically reacting urea and boric acid in heat treatment at 850 °C. The hBN was produced using the previous precursor in a SPS at 1500, 1700, and 1900 °C. The samples were characterized using XRD, FTIR, SEM and Raman spectroscopy. The properties of the samples were further determined through measurements of density, DSC and thermal diffusivity. The hBN samples obtained through the SPS process have nano and micron-size grains. The hBN was highly crystalline and homogeneous, as determined by the XRD pattern, Raman spectra and Raman maps. The orientation of hBN grains has been revealed in the c-axis of hBN crystallites and was preferably arranged within a plane parallel to the SPS pressing direction. The hBN orientation preference index (IOP) value of −19925.5 at 1700 °C indicates the highest quality texture orientation. Increasing the temperature to 1900 °C decreased the orientation in the direction parallel to the pressing direction. The highest thermal conductivity calculated according to the thermal diffusivity perpendicular to the sintering pressure direction was 8.86 W m −1 K −1 at 1900 °C.

Effects of cross-scale h-BN grains and orientation degree on the mechanical and thermal properties of BN-matrix textured ceramics

Finite element analysis of effect of grain orientation on the thermal conduction of <i>h</i>-BN ceramics

The effects of holding time on grain size, orientation degree and properties of h-BN matrix textured ceramics

Grain-orientation Dependence of the Anisotropic Thermal Shock Performance of Hexagonal Boron Nitride Ceramics

Grain Boundaries in Chemical-Vapor-deposited Atomically Thin Hexagonal Boron Nitride

Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics

Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics

Anisotropic properties of textured h-BN matrix ceramics prepared using 3Y2O3-5Al2O3(-4MgO) as sintering additives

Preparation of highly oriented h-BN based textured ceramics via grain rearrangement under DLP printing and low-pressure sintering

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Effect of hexagonal boron nitride content on the anisotropy of hot-press-sintered AlN/BN composite ceramics

Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG

Preparation of h-BN-Based Textured Ceramics by Grain Rearrangement During Ultraviolet Curing Assisted Hot-Press Sintering

The investigation of synthesis and textured properties of in situ formed hBN with spark plasma sintering

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Effects of sintering temperature on the microstructure and properties of h-BN ceramics with MAS as liquid sintering aid

Effects of sintering temperature on the microstructure and properties of <i>h</i>-BN ceramics with MAS as liquid sintering aid

Effect of Boron Nitride Particle Geometry on the Thermal Conductivity of a Boron Nitride Enhanced Polymer Composite Film

Reducing high-temperature dielectric loss of h-BN ceramics by orienting grains