Abstract:Si3N4 aerogel, which is one of the most promising materials for application as high-temperature thermal insulation, is synthesized by the urea-assisted sol-gel technique, followed by the supercritical drying, carbonization, carbothermal reduction and carbon combustion processes. The effects of heat treatment temperatures on the physicochemical and textural evolution of mesoporous Si3N4 aerogel are investigated. Si3N4 aerogel is formed when the heat treatment temperature increases to 1500 degrees C, whereas it transforms into SiC phase with a further higher temperature of 1600 degrees C. The SEM analysis confirms the existence of Si3N4 nanoparticles, and the particle size of Si3N4 nanoparticles is around 20-40 nm, with pore size around 20-40 nm. The XPS measurement reveals that Si3N4 aerogel is composed of 74.4% Si3N4 phase, with lower content of 25.6% SiO2. codoped aerogel possesses a large BET specific surface area of 519.6 m(2)/g, which results from the mesoporous pores left after carbon combustion. This value is much larger than that of the conventional Si3N4 porous ceramics and Si3N4 nano materials ever reported. The BJH adsorption average pore diameter of Si3N4 aerogel is around 11.8 nm, with a large pore volume of 3.5 cm(3)/g. Si3N4 oxidation with forming amorphous SiO2 layer on the surface is observed by the TG measurement. Moreover, the resulting Si3N4 aerogel shows low bulk density of 0.075 g/cm(3), as well as low thermal conductivity of 0.045 W/(m.K) at room temperature. The mechanism of Si3N4 formation is based on the VS growth between C, SiO2 and N-2. The structures evolution and formation mechanism of Si3N4 aerogel are also investigated in this study.

Synthesis and Characterization of the Monolithic Nio-Al2o3 Aerogels

Synthesis and characterization of SiO2-Al2O3 composite aerogel using inorganic aluminum salt as raw material

Synthesis of monolithic aerogel-like alumina via the accumulation of mesoporous hollow microspheres

Synthesis of a novel Al 2 O 3 –SiO 2 composite aerogel with high specific surface area at elevated temperatures using inexpensive inorganic salt of aluminum

Synthesis of High-Surface-Area Alumina Aerogels without the Use of Alkoxide Precursors

Preparation of monolithic Al2O3–SiO2 aerogels with high-temperature resistance using boehmite nanorods

One-step Synthesis of Monolithic Micro-Nano Yttria Stabilized ZrO2-Al2O3 Composite Aerogel

A Facile Method to Fabricate Al2O3-SiO2 Aerogels with Low Shrinkage up to 1200 °C

Novel Al2O3–SiO2 composite aerogels with high specific surface area at elevated temperatures with different alumina/silica molar ratios prepared by a non-alkoxide sol–gel method

Synthesis of Alumina Aerogels by Ambient Drying Method and Control of Their Structures

Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel

Synthesis and Textural Evolution of Mesoporous Si3N4 Aerogel with High Specific Surface Area and Excellent Thermal Insulation Property Via the Urea Assisted Sol-Gel Technique

Synthesis of Al2O3-SiO2 aerogels with low thermal conductivity and high strength by methyltriethoxysilane as a silica precursor

SiO 2 Nanostructure-Based Aerogels with High Strength and Deformability for Thermal Insulation

Preparation and Characterization of C/Al 2 O 3 Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Evolution of the Novel C/SiO2/SiC Ternary Aerogel with High Specific Surface Area and Improved Oxidation Resistance

Preparation of the methyltriethoxysilane based aerogel monolith with an ultra-low density and excellent mechanical properties by ambient pressure drying

Fabrication and Thermal Stability of La2O3 Doped Alumina Aerogel

A Novel Na2O-B2O3-SiO2 System Aerogel

STUDY ON STRUCTURE CHARACTERISTICS OF RESORCINOLFORMALDEHYDE AND Ni(OH)_2 COMPOSITE AEROGELS

Preparation and Characterization of High Surface Area Zro2 Aerogel Modified by Sio2