Abstract:Aerogel is a kind of high-performance lightweight open-porous solids with ultralow density, high specific surface area, and broad application in many emerging fields including biotechnology, energy, environment, aerospace, etc. A giant challenge remains in preventing of the hydrophilic aerogel framework shrinkage when replacing of solvent with air in its extremely abundant nanosized pores during its fabrication process in ambient conditions. In this work, started from a linear polymeric precursor with further condensation reaction, superhydrophilic silica aerogels with self-reinforced microstructure and the least volume shrinkage have been successfully obtained via ambient pressure drying process without use of any additives in the presence of a low surface tension solvent. The resulting superhydrophilic silica aerogels possess specific surface area up to 1065 m2/g, pore volume up to 2.17 cm3/g and density down to 84 mg/cm3, and these values are comparable to those of their counterparts obtained by supercritical CO2 drying process. Moreover, as an application demonstration, the bioinspired hydrogels with desirable mechanical flexibility and adhesive performance at extremely harsh environment (e.g., below −50 °C) have been successfully synthesized by mimicking carrier of a functional bioagent with the resulting superhydrophilic silica aerogel microparticles. Our work has made a significant step forward for future high-performance hydrophilic aerogels with self-enhanced microstructures and the resulting superhydrophilic aerogels have shown great potentials in making functional hydrogels with bionic properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.langmuir.1c00476?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.langmuir.1c00476</a>.Photo images, 1H NMR spectra, LC-MS of T-TEOS and ESOM, N2 absorption–desorption isotherms of the silica aerogels and xerogel, proposed structure of T-TEOS, ESOM, and silica gels, SEM image of silica aerogel derived from T-TEOS and ESOM, photo images of the drying process of the silica aerogel and xerogel, the process of releasing glycerol and absorbing water from silica aerogels, the amount of glycerol released from silica aerogel versus time, theoretical calculation of interaction strength of PVA–PET and PVA–PS, synthetic parameter, physical properties of the silica aerogels and xerogels (<a class="ext-link" href="/doi/suppl/10.1021/acs.langmuir.1c00476/suppl_file/la1c00476_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of the methyltriethoxysilane based aerogel monolith with an ultra-low density and excellent mechanical properties by ambient pressure drying

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

High Compression Strength and Thermal Insulation Silica Aerogel Monolith with Scaffold of a Cyclic Olefin Siloxane Co-Oligomer Via Ambient Pressure Drying

Preparation of Silica Aerogels Via Ambient Pressure Drying

Transparent, Ultraflexible, and Superinsulating Nanofibrous Biocomposite Aerogels Via Ambient Pressure Drying

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Ultrahigh-strength silicone aerogels reinforced by an armor-like epoxy framework via a temperature-controlled sequential reaction strategy

Enhancing Mesopore Volume and Thermal Insulation of Silica Aerogel via Ambient Pressure Drying-Assisted Foaming Method

Synthesis of alumina aerogel enriched carboxymethyl cellulose with polymodal pore size distribution by ambient pressure drying

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process

Preparation of Low Density Hydrophobic Silica Aerogels by Controlling Strength of Alcogels

Isocyanate-crosslinked silica aerogel monolith with low thermal conductivity and much enhanced mechanical properties: Fabrication and analysis of forming mechanisms

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Elastic Silica Aerogel Using Methyltrimethoxysilane Precusor Via Ambient Pressure Drying

High-Performance Methylsilsesquioxane Aerogels: Hydrolysis Mechanisms and Maximizing Compression Properties

Novel atmospheric pressure drying method for silica-based aerogel insulation: Inspired with the adult process of damselflies

Fumed Silica-Derived, Ambient Dried, and Low-Cost Nanoporous Aerogel-like Monoliths for Thermal Insulation

A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique

Silica Aerogels with Self-Reinforced Microstructure for Bioinspired Hydrogels

In-situ acid catalysis strategy to achieve rapid ambient pressure drying preparation of aerogels