Abstract:The preparation of monolithic silica aerogels via non-supercritical drying is realized by the following procedures: (1) formation of silica alcogels with perfect network structure by controlling two-step hydrolysis and condensation reaction rates of tetraethoxysilane; (2) improvement and reinforcement of network structure and strength of silica gels through exchanging the pore fluid with ethanol solvent thoroughly, immersing of gels in the ethanol solutions of tetraethyoxysilane and aging; (3) gradual drying under ethanol fluid whose surface tension is much lower than water under ambient pressure. The resulting aerogels were characterized by means of SEM, TEM, TG-DTA, XRD, and adsorption-desorption techniques. It is found that the aerogels, which are made up of uniform spherical nanoparticles with diameters of about 10 nm, are of coherent network structures. Furthermore, the aerogels are porous, and the porosity is as high as 91%. The diameter of the pore sizes is in the range of 10 similar to 30 nm, and the density of the aerogels is low (200 similar to 400 kg . m(-3)). The specific surface area of the aerogels can be as high as 625. 65 m(2) . g(-1). The appearance, microstructure, diameters of primary particles and pore size distributions of the aerogels are in concordance with those prepared by conventional supercritical drying. It is demonstrated that the quality of the resulting aerogels is affected by the preparation conditions adopted in the preparation process. In fact, by adjusting the proportions of the reaction systems, and controlling the adding amounts of acid and base during the two-step hydrolysis and condensation process, silica aerogels with required density, definite strength and ideal morphology can be produced.

Preparation of Silica Aerogels Via Ambient Pressure Drying

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Preparation of Silica Aerogels by Non-Supercritical Drying

Progress on the Preparation of SiO2Aerogel Composites by Ambient Pressure Drying Technique

A Novel Preparation of Superhydrophobic Silica Aerogels Via the Combustion Drying Method

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Research Progress in Preparing Silica Aerogel by Ambient Pressure Drying

PREPARATION OF SILICA AEROGELS BY SUPERCRITICAL DRYING TECHNIQUE

Ambient Pressure Preparation,Surface Structure and Adsorption Properties of Silica Aerogels

Preparation and Characterization of Silica Aerogels Derived from Ambient Pressure

In-situ acid catalysis strategy to achieve rapid ambient pressure drying preparation of aerogels

Preparation and Surface Modification Mechanism of Silica Aerogels Via Ambient Pressure Drying

Preparation of Aerogels by Non-supercritical Drying Technique

PREPARATION OF SILICA AEROGELS IN AMBIENT PRESSURE DRYING AND ANALYSIS OF PROPERTIES

Transparent, Ultraflexible, and Superinsulating Nanofibrous Biocomposite Aerogels Via Ambient Pressure Drying

Preparation and Characterization of Silica Aerogels from Diatomite Via Ambient Pressure Drying

Preparation of the methyltriethoxysilane based aerogel monolith with an ultra-low density and excellent mechanical properties by ambient pressure drying

Effects of Preparation Conditions on Hydrophobic Silica Aerogels Via Ambient Pressure Drying

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Preparation of Low Density Hydrophobic Silica Aerogels by Controlling Strength of Alcogels

Fast and One-Pot Synthesis of Silica Aerogels Via A Quasi-Solvent-Exchange-Free Ambient Pressure Drying Process