Abstract:Nanostructure reinforced nitride ceramics play an important role in the family of structural ceramics. In this study, large scale of one-dimensional (1D) beta-sialon nanostructures and beta-sialon-beta-Si3N4 composite powders were synthesized simultaneously via a reduction nitridation process by using powders of silicon, aluminum, and silica as raw materials. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM/HRTEM), Fourier-transform infrared spectroscopy (FT-IR) and energy dispersive x-ray spectroscopy (EDS) were used to characterize the phase composition, morphology, and microstructure of the as-obtained products. As a result, large scale of 1D beta-sialon nanostructures can be prepared at 1600 degrees C. The diameter of the as-prepared nanowires in the range of 80 to 170 nm can be tailored by the addition of aluminum. The growth of 1D beta-sialon nanostructures is achieved by a vapor-solid (VS) mechanism. Photoluminescence (PL) of the 1D beta-sialon nanostructures was characterized which exhibit violet/blue emission peaks, making it have the potential to be applied in optoelectronic nanodevices. Besides, nitride ceramic composite powders including beta-Si3N4 and beta-sialon with in situ formed beta-sialon nanowires were also achieved. The phase transformation behavior and the thermodynamical analysis of the ceramic composite powders were also studied by characterizing the phase composition of the products synthesized at different temperature. The as-grown beta-sialon nanowires and the composite powders have great potential to be applied in nanostructure reinforced structural ceramics.

Preparation of β-Si3N4 Single Crystal Particles

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Preparation of β-Si3N4 Seeds and Self-reinforced Si3N4 Ceramics

New Route to Improve the Fracture Toughness and Flexural Strength of Si3N4 Ceramics by Adding FeSi2

Preparation and Characterization of Rod-Like Β-Si<sub>3</sub>n<sub>4</sub> Seeds

Preparation of the Rod-Like Β-Si3n4 Particles Favoring the Self-Reinforcing Si3N4 Ceramics

Preparation of the rod-like {beta}-Si{sub 3}N{sub 4} particles favoring the self-reinforcing Si{sub 3}N{sub 4} ceramics

High-pressure Synthesis of High-Performance Submicron-Sized Polycrystalline Β-Si3n4 Bulk Without Additives

Study on the Preparation,Properties and Mechnism of β-Si_3N_4 Crystal Seeds

Synthesis and Growth Mechanism of Single Crystal Β‐si3n4 Particles with a Quasi‐spherical Morphology

Effect of Seed Crystal Properties on the Microstructure of Si<sub>3</sub>N<sub>4</sub> Ceramics

Fabrication and Characterization of β-Si3N4 Seeds with Additive of Lu2O3

Microstructure and Performance of Silicon Nitride Ceramics with Lu2O3 Additives

Effect of the Residual Phases in Β-Si3n4 Seed on the Mechanical Properties of Self-Reinforced Si3N4 Ceramics

Precisely Controlled Carbothermal Synthesis of Spherical Β-Si3n4 Granules

Synthesis and Growth Mechanism of Approximate Spherical Β‐si3n4 Particles Via Carbothermal Reduction‐nitridation Method

Growth mechanism and synchronous synthesis of 1D beta-sialon nanostructures and beta-sialon-Si3N4 composite powders by a process of reduction nitridation

Pressureless Sintering and Properties Investigation of Silicon Nitride

Synthesis of well-dispersed β-Si3N4 with equiaxed structures using carbothermal reduction–nitridation method

Preparation of in-situ synthesized SiC particles reinforced highly porous Si3N4 ceramics by gel-casting

Carbothermal Synthesis Of Micron-Sized Beta-Si3n4 With Tailored Morphology