Abstract:Nanostructure reinforced nitride ceramics play an important role in the family of structural ceramics. In this study, large scale of one-dimensional (1D) beta-sialon nanostructures and beta-sialon-beta-Si3N4 composite powders were synthesized simultaneously via a reduction nitridation process by using powders of silicon, aluminum, and silica as raw materials. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM/HRTEM), Fourier-transform infrared spectroscopy (FT-IR) and energy dispersive x-ray spectroscopy (EDS) were used to characterize the phase composition, morphology, and microstructure of the as-obtained products. As a result, large scale of 1D beta-sialon nanostructures can be prepared at 1600 degrees C. The diameter of the as-prepared nanowires in the range of 80 to 170 nm can be tailored by the addition of aluminum. The growth of 1D beta-sialon nanostructures is achieved by a vapor-solid (VS) mechanism. Photoluminescence (PL) of the 1D beta-sialon nanostructures was characterized which exhibit violet/blue emission peaks, making it have the potential to be applied in optoelectronic nanodevices. Besides, nitride ceramic composite powders including beta-Si3N4 and beta-sialon with in situ formed beta-sialon nanowires were also achieved. The phase transformation behavior and the thermodynamical analysis of the ceramic composite powders were also studied by characterizing the phase composition of the products synthesized at different temperature. The as-grown beta-sialon nanowires and the composite powders have great potential to be applied in nanostructure reinforced structural ceramics.

Synthesis and Growth Mechanism of Approximate Spherical Β‐si3n4 Particles Via Carbothermal Reduction‐nitridation Method

Synthesis and Growth Mechanism of Single Crystal Β‐si3n4 Particles with a Quasi‐spherical Morphology

Synthesis of well-dispersed β-Si3N4 with equiaxed structures using carbothermal reduction–nitridation method

High-pressure Synthesis of High-Performance Submicron-Sized Polycrystalline Β-Si3n4 Bulk Without Additives

Carbothermal Synthesis Of Micron-Sized Beta-Si3n4 With Tailored Morphology

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Precisely Controlled Carbothermal Synthesis of Spherical Β-Si3n4 Granules

Synthesis of Spherical Si3N4 Powders by Liquid‐phase Modified Carbothermal Reduction and Nitridation

Synthesis of Well-Dispersed Columnar Si 3 N 4 Using Carbothermal Reduction–nitridation Method

Growth mechanism and synchronous synthesis of 1D beta-sialon nanostructures and beta-sialon-Si3N4 composite powders by a process of reduction nitridation

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Synthesis of β-Si3N4 powder from quartz via carbothermal reduction nitridation

Synthesis of Near-Spherical BN Powders by Templated Carbothermal Reduction and Nitridation

Synthesis of Si 3 N 4 powder with tunable α/β-Si 3 N 4 content from waste silica fume using carbothermal reduction nitridation

In‐situ combustion synthesis of spherical Si@Si <sub>3</sub> N <sub>4</sub> granules

In situ combustion synthesis of spherical Si@Si<sub>3</sub>N<sub>4</sub> granules

Preparation of β-Si3N4 Single Crystal Particles

In‐situ combustion synthesis of spherical Si@Si3N4 granules

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Growth and Morphology of Beta-Si3n4 Nano-Belts by Carbothermal Reduction Nitridation of Used Silica Refractory Brick

Coarse‐grained Β‐si3n4 Powders Prepared by Combustion Synthesis