Abstract:Dimethyl ether (DME) is regarded as an environmentally benign fuel for vehicles. Two kinds of reactor technologies for DME synthesis have been proposed by previous researchers: the fixed-bed and the slurry reactor. As the reactions are highly exothermic and the temperature window of the catalyst is very narrow, the fixed-bed reactor provides a limited heat removal capability and a low conversion of the syngas. The slurry reactor can provide an effective temperature control but a very high inter-phase mass transfer resistance is added by the liquid medium. The Fluidized bed reactor can be an ideal reactor for DME synthesis as it possesses both high heat and mass transfer efficiencies. In this paper, a two-phase model is used to theoretically analyze the DME synthesis in a fluidized bed reactor, with both phases assumed to be in plug flow and taking into account the changes in bubble diameter resulting from the reaction. Three reactions take place simultaneously when DME is manufactured from the syngas (H2 + CO): a) CO+2H2 = CH3OH; b) 2CH3OH = DME+H2O; and c) CO+H2O = CO2+H2. The simulation shows that, at the reactor outlet, the equilibrium approaches of the three reactions are 0.32, 0.1, and 0.61, respectively. When H2/CO=1.0, the CO conversion and DME selectivity in a fluidized bed reactor are 62% and 95%, while those in a fixed-bed reactor are 9% and 86%. In a slurry reactor, the CO conversion and DME selectivity are 17% and 70%, respectively. Therefore, the fluidized-bed is the most promising candidate reactor for conducting the DME synthesis from syngas. Effects of the operating conditions on the performance of DME synthesis in the fluidized-bed reactor are discussed in details. The optimal H2/CO ratio is between 1.0-1.5, and increasing the pressure is shown to improve the reactor performance.

Multi-scale simulations of fluidized bed reactor for synthesis of methylchlorosilane

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Simulation of multi-fluidized-bed in series for methanol to olefins

Conversion of Methyltrichlorosilane in Stirred Bed Reactor by Methylalumminumchloride Method

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Experimental Study of Direct Synthesis Process of Methyl Chlorosilane in Fluidized Bed Reactor

The Simulation of an Industrial Fixed Bed Reactor for Methanol Dehydration to Dimethyl Ether

Simulation and Experiment Study of Dimethyl Ether Synthesis from Syngas in A Fluidized-Bed Reactor

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis

Multi-scale CFD Simulations of Bubbling Fluidized Bed Methanation Process

Numerical Simulation of Scale-Up Effects of Methanol-to-olefins Fluidized Bed Reactors

Engineering Optimization of Producing High-Purity Dichlorosilane in a Fixed-Bed Reactor by Trichlorosilane Decomposition

The fluid-dynamic study and CFD simulation of bubbling fluidized bed for Si3N4 synthesis

Fluidized Bed Reactors for Solar-Grade Silicon and Silane Production

Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas

3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor

Mathematical Simulation of Methanol Synthesis in a Slurry Reactor

Numerical Simulations of Particle Growth in a Silicon-Cvd Fluidized Bed Reactor Via a CFD–PBM Coupled Model

Modeling of Bubble Column Slurry Reactor for Dimethyl Ether Synthesis from Syngas