Abstract:Dimethyl ether (DME) is regarded as an environmentally benign fuel for vehicles. Two kinds of reactor technologies for DME synthesis have been proposed by previous researchers: the fixed-bed and the slurry reactor. As the reactions are highly exothermic and the temperature window of the catalyst is very narrow, the fixed-bed reactor provides a limited heat removal capability and a low conversion of the syngas. The slurry reactor can provide an effective temperature control but a very high inter-phase mass transfer resistance is added by the liquid medium. The Fluidized bed reactor can be an ideal reactor for DME synthesis as it possesses both high heat and mass transfer efficiencies. In this paper, a two-phase model is used to theoretically analyze the DME synthesis in a fluidized bed reactor, with both phases assumed to be in plug flow and taking into account the changes in bubble diameter resulting from the reaction. Three reactions take place simultaneously when DME is manufactured from the syngas (H2 + CO): a) CO+2H2 = CH3OH; b) 2CH3OH = DME+H2O; and c) CO+H2O = CO2+H2. The simulation shows that, at the reactor outlet, the equilibrium approaches of the three reactions are 0.32, 0.1, and 0.61, respectively. When H2/CO=1.0, the CO conversion and DME selectivity in a fluidized bed reactor are 62% and 95%, while those in a fixed-bed reactor are 9% and 86%. In a slurry reactor, the CO conversion and DME selectivity are 17% and 70%, respectively. Therefore, the fluidized-bed is the most promising candidate reactor for conducting the DME synthesis from syngas. Effects of the operating conditions on the performance of DME synthesis in the fluidized-bed reactor are discussed in details. The optimal H2/CO ratio is between 1.0-1.5, and increasing the pressure is shown to improve the reactor performance.

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis

The Simulation of an Industrial Fixed Bed Reactor for Methanol Dehydration to Dimethyl Ether

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Process Simulation of Dimethyl Ether Synthesis Via Methanol Vapor Phase Dehydration

CFD Simulation of Methanol Dehydration Step through an Adiabatic Fixed-bed Reactor of DME Synthesis

Simulation of the internal cooling tubular reactor for Methanol dehydration to dimethyl ether

Simulation and Experiment Study of Dimethyl Ether Synthesis from Syngas in A Fluidized-Bed Reactor

Mathematical Simulation on Tube-shell Type Fixed-bed Reactor for Dimethyl Ether Synthesis

Modeling and Simulation of Tube-Shell Reactor for Dimethyl-Ether Synthesis from Coal-Based Synthesis Gas

Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas

Process simulation of dimethyl ether distillation unit

Modeling and Simulation of Production Process on Dimethyl Ether Synthesized from Coal-based Syngas by One-step Method

Simulation of Methane Conversion to Syngas in a Membrane Reactor: Part I A Model Including Product Oxidation

Mathematical Simulation on Multi-bed Adiabatic Reactor with Indirect Heat Exchange for MTO Reaction

Two-dimensional Mathematical Model and Analysis of Tube-shell Type Reactor for Synthesis of Dimethyl Ether from Syngas

Modeling of Bubble Column Slurry Reactor for Dimethyl Ether Synthesis from Syngas

Global Kinetics of Direct Synthesis of Dimethyl Ether from Syngas in Slurry Reactor over Cu-Zn-Al-Zr Catalyst

A Computationally Efficient Multi-Scale Simulation of a Multi-Stage Fixed-Bed Reactor for Methanol to Propylene Reactions

Intrinsic Kinetics of Dimethyl Ether Synthesis from Syngas

Simulation and Analysis of the Operating Conditions of Methanol Synthesis Converter