Abstract:Dimethyl ether (DME) is regarded as an environmentally benign fuel for vehicles. Two kinds of reactor technologies for DME synthesis have been proposed by previous researchers: the fixed-bed and the slurry reactor. As the reactions are highly exothermic and the temperature window of the catalyst is very narrow, the fixed-bed reactor provides a limited heat removal capability and a low conversion of the syngas. The slurry reactor can provide an effective temperature control but a very high inter-phase mass transfer resistance is added by the liquid medium. The Fluidized bed reactor can be an ideal reactor for DME synthesis as it possesses both high heat and mass transfer efficiencies. In this paper, a two-phase model is used to theoretically analyze the DME synthesis in a fluidized bed reactor, with both phases assumed to be in plug flow and taking into account the changes in bubble diameter resulting from the reaction. Three reactions take place simultaneously when DME is manufactured from the syngas (H2 + CO): a) CO+2H2 = CH3OH; b) 2CH3OH = DME+H2O; and c) CO+H2O = CO2+H2. The simulation shows that, at the reactor outlet, the equilibrium approaches of the three reactions are 0.32, 0.1, and 0.61, respectively. When H2/CO=1.0, the CO conversion and DME selectivity in a fluidized bed reactor are 62% and 95%, while those in a fixed-bed reactor are 9% and 86%. In a slurry reactor, the CO conversion and DME selectivity are 17% and 70%, respectively. Therefore, the fluidized-bed is the most promising candidate reactor for conducting the DME synthesis from syngas. Effects of the operating conditions on the performance of DME synthesis in the fluidized-bed reactor are discussed in details. The optimal H2/CO ratio is between 1.0-1.5, and increasing the pressure is shown to improve the reactor performance.

Modeling of Bubble Column Slurry Reactor for Dimethyl Ether Synthesis from Syngas

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Modeling of methanol synthesis in bubble slurry column reactor

An Axial Dispersion Model for Evaporating Bubble Column Reactor

Study on direct alcohol/ether fuel synthesis process in bubble column slurry reactor

Direct Synthesis Process for Alcohol/Ether Fuel in Bubble Column Slurry Reactor and Mathematical Models

Dynamic Matrix Control of a Bubble-Column Reactor for Microbial Synthesis Gas Fermentation

Modeling of the Fischer–Tropsch Synthesis in Slurry Bubble Column Reactors

Modeling of a Slurry Bubble Column Reactor for Fischer-Tropsch Synthesis

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Modeling and Simulation of Tube-Shell Reactor for Dimethyl-Ether Synthesis from Coal-Based Synthesis Gas

Mathematical Simulation of Methanol Synthesis in a Slurry Reactor

Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas

Global Kinetics of Direct Synthesis of Dimethyl Ether from Syngas in Slurry Reactor over Cu-Zn-Al-Zr Catalyst

A Scale-Up Strategy for Low-Temperature Methanol Synthesis in a Circulating Slurry Bubble Reactor

Two-Dimensional Mathematical Model of Tube-Shell Type Dimethyl Ether Synthesis Reactor from Syngas

Simulation and Experiment Study of Dimethyl Ether Synthesis from Syngas in A Fluidized-Bed Reactor

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis

Technique on Synthesis of Alcohol Ether Fuel in Slurry Bubble Column Reactors (I)-Experimental Study on Bubble Behavior

Experimental and modeling studies on a homogeneous reactive distillation system for dimethyl carbonate synthesis by transesterification

Two-dimensional Mathematical Model and Analysis of Tube-shell Type Reactor for Synthesis of Dimethyl Ether from Syngas