Abstract:The main objective of this study is to predict the performance of an industrial‐scale (ID = 5.8 m) slurry bubble column reactor (SBCR) operating with iron‐based catalyst for Fischer–Tropsch (FT) synthesis, with emphasis on catalyst deactivation. To achieve this objective, a comprehensive reactor model, incorporating the hydrodynamic and mass‐transfer parameters (gas holdup, εG, Sauter‐mean diameter of gas bubbles, d32, and volumetric liquid‐side mass‐transfer coefficients, kLa), and FT as well as water gas shift reaction kinetics, was developed. The hydrodynamic and mass‐transfer parameters for He/N2 gaseous mixtures, as surrogates for H2/CO, were obtained in an actual molten FT reactor wax produced from the same reactor. The data were measured in a pilot‐scale (0.29 m) SBCR under different pressures (4–31 bar), temperatures (380–500 K), superficial gas velocities (0.1–0.3 m/s), and iron‐based catalyst concentrations (0–45 wt %). The data were modeled and predictive correlations were incorporated into the reactor model. The reactor model was then used to study the effects of catalyst concentration and reactor length‐to‐diameter ratio (L/D) on the water partial pressure, which is mainly responsible for iron catalyst deactivation, the H2 and CO conversions and the C5+ product yields. The modeling results of the industrial SBCR investigated in this study showed that (1) the water partial pressure should be maintained under 3 bars to minimize deactivation of the iron‐based catalyst used; (2) the catalyst concentration has much more impact on the gas holdup and reactor performance than the reactor height; and (3) the reactor should be operated in the kinetically controlled regime with an L/D of 4.48 and a catalyst concentration of 22 wt % to maximize C5+ products yield, while minimizing the iron catalyst deactivation. Under such conditions, the H2 and CO conversions were 49.4% and 69.3%, respectively, and the C5+ products yield was 435.6 ton/day. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3838–3857, 2015

Modeling of a Slurry Bubble Column Reactor for Fischer-Tropsch Synthesis

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Modeling and Simulation of Commercial Catalytic Reformers

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Assessing the Performance of an Industrial SBCR for Fischer–Tropsch Synthesis: Experimental and Modeling

Discussion about numerical simulation of slurry bubble column reactor for F T synthesis

Mathematical Simulation of Methanol Synthesis in a Slurry Reactor

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor

Study on Operation of Internal Filtration in the Column Slurry Reactor of Fischer-Tropsch Synthesis

Modeling and Analysis for Coal Gasification Co-Production System of Fischer-Tropsch Synthesis Liquids and Electricity

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Kinetics Modeling and Operating Conditions Optimization of Fischer-Tropsch Synthesis over Fe-based Catalysts

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Pore Diffusion Simulation Model of Bimodal Catalyst for Fischer-Tropsch Synthesis

Eight-lumped kinetic model for Fischer-Tropsch wax catalytic cracking and riser reactor simulation

2D and 3d Simulations of Fluid Dynamics in the Bubble Reactor for Liquid Fuel Synthesis: Comparisons Against Experiments