Abstract:This paper reviews the design, operation, and sequential modifications of a bench-scale high-pressure fluidized bed reactor system, capable of diverse pyrolysis and gasification applications, all based on the same hardware platform. The reactor is small: 34 mm i.d. and 504 turn high. The mechanical design is relatively simple and inexpensive, featuring direct electrical heating to avoid the use of a separate furnace. The reactor body is made of a high-strength alloy, with 1000 h creep resistance at maximum design conditions (1000 degrees C and 3.0 MPa). The design thus obviates the use of a "cold" pressure casing. The system can be operated by a single person and has demonstrated ability to generate fuel reactivity and product distribution data rapidly and cheaply, using a wide range of solid fuels. In batch operation, conversions achieved during coal pyrolysis and gasification experiments were comparable with results from a high-pressure wire-mesh reactor, indicating nearly single-particle behavior. The system has been modified for continuous feeding (similar to 3 g min(-1)), to study the effect of reaction conditions on the fate of fuel-N, during the gasification of coal and sewage sludge (to 3.0 MPa). The work showed that steam plays a primary role in the formation of NH3 from both volatile-N and char-N. HCN concentrations were found to depend strongly on the residence time at temperature and on the extent of contact with heated bed solids. A quartz lining allowed the determination of extents of trace element emissions during gasification. Above 900 degrees C, enhanced depletion of Ba, Pb, and Zn in bed solids was accompanied by enrichment of fines, collected in a downstream filter. The system was subsequently modified to enable a slug of coal to be injected and bed solids discharged (1-3.0 MPa) from the fluidized bed under controlled conditions and precise solid residence times in the bed. The reactivities of the chars were measured as a function of "residence time at temperature" and were observed to decrease with increasing temperature, time, pressure, and particle size. At 1000 degrees C, coal char reactivities were found to diminish by nearly a factor of 4 within 10 s. The study confirmed and extended prior work carried out in a high-pressure wire-mesh reactor. The system was subsequently configured for pyrolyzing waste plastic material at low temperatures. Altering the electrode positions enabled changing the position of the heated zone, enabling trouble-free injection of polymer samples at temperatures up to 600 degrees C. The aim of these experiments was to investigate the potential to produce liquid fuel precursors from pure and mixed waste plastics. In its latest incarnation the system has been further modified for performing oxy-fuel gasification experiments.

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Flow Distribution in a Novel Fixed Bed Bionic Reactor

The two-dimensional heterogeneous modeling for non-isothermal non-adiabatic fixed-bed reactor and the analysis by orthogonal collocation

Design and Technoeconomic Analysis of Fischer–Tropsch Fixed‐Bed Synthesis with Cobalt‐Based Catalysts

Heat transfer intensification in compact tubular reactors with cellular internals: A pilot-scale assessment of highly conductive packed-POCS with skin applied to the Fischer-Tropsch synthesis

Experimental modeling to design a heat exchanger control strategy for a Fischer–Tropsch fluidized bed

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

The analysis of hot spots in large scale fluidized bed reactors

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor

Particle-scale simulation on the effect of catalyst shape on the strongly exothermic Fischer–Tropsch synthesis process

On the Use of Steady-State Optimal Initial Operating Conditions for Control Scheme Implementation of a Fixed-Bed Fischer–Tropsch Reactor

Operando magnetic resonance imaging of product distributions within the pores of catalyst pellets during Fischer–Tropsch synthesis

Numerical Simulation of Cross Flow in Fixed Bed Reactor

Assessing the Performance of an Industrial SBCR for Fischer–Tropsch Synthesis: Experimental and Modeling

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

Development of a Bench-Scale High-Pressure Fluidized Bed Reactor and Its Sequential Modification for Studying Diverse Aspects of Pyrolysis and Gasification of Coal and Biomass

Effect of Syngas Partial Pressure on Fischer-Tropsch Reaction Rate

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor