Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

CFD Simulation of Fluid Flow and Heat Transfer of Single Phase Inside the Shell Side of Multitubular Fixed Bed Reactor

Novel Multi-Tubular Fixed-Bed Reactors’ Shell Structural Analysis Based on Numerical Simulation Method

Numerical Simulation of Cross Flow in Fixed Bed Reactor

Cfd Simulation of the Hydrodynamics in an Industrial Scale Cyclohexane Oxidation Airlift Loop Reactor

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

CFD Simulation and Optimization of Flow-Reverse Catalytic-Combustion Reactor

Numerical Investigation of Flow and Heat Transfer in a Novel Configuration Multi-Tubular Fixed Bed Reactor for Propylene to Acrolein Process

Fluid Flow and Heat Transfer in the Shell Side of a Cross-flow Fixed-bed Reactor for Propylene Oxidation

Multi-scale CFD Simulation of Hydrodynamics and Cracking Reactions in Fixed Fluidized Bed Reactors

NUMERICAL SIMULATION OF THE TRANSFER AND REACTION PROCESSES IN CATALYTIC REFORMING FIXED BED REACTORS

CFD-DEM coupling simulation of fixed bed reactor with small diameter ratio

CFD simulation of fixed-bed methanation reactor with double catalyst layers

Computational Fluid Dynamics Simulation of Hydrodynamics and Chemical Reaction in a CFB Downer

3D virtual full-loop CFD simulation of industrial two-stage FCC reaction–regeneration system

Numerical analysis of reaction process and flow field in fixed bed of methanation reactor

Multi-scale Heat Transfer in Fluidized Bed Reactors by Eulerian CFD Modeling

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Multi-scale CFD Simulations of Bubbling Fluidized Bed Methanation Process