Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Eulerian-Lagrangian simulation of hydrodynamics of gas-solid flows in downer

CFD-DEM Simulation of Clustering Phenomena in Riser and Downer

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Computational Fluid Dynamics Simulation of Hydrodynamics and Chemical Reaction in a CFB Downer

CFD simulation of hydrodynamics of gas-solid multiphase flow in downer reactors: Revisited

CFD simulation of hydrodynamics in downer reactors

Eulerian-Lagrangian Simulation of Distinct Clustering Phenomena and Rtds in Riser and Downer

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

CFD–DEM Simulation of Gas–solid Reacting Flows in Fluid Catalytic Cracking (FCC) Process

Discrete Particle Simulation of Heterogeneous Gas-Solid Flows in Riser and Downer Reactors

Numerical Simulation of Hydrodynamic Behaviors in a Novel Gas-Solids Conical Downer

DOWNER ENTRANCE STRUCTURE BASED ON STRONG TURBULENCE DISPERSION

CFD Simulation of Hydrodynamics in the Entrance Region of a Downer

CFD-DEM Simulation of Gas-Solid Reacting Flows in Catalytic Reactor

3D CPFD Simulation of Circulating Fluidized Bed Downer and Riser: Comparisons of Flow Structure and Solids Back-Mixing Behavior

Numerical study of solids behavior in fluidized bed with multi-immersed tubes

Simulation of Gas-Solid Flow Behavior in Downers Using a New Drag Model Based on the Spatial Superposition Assumption

Simulation of the Lateral Movement on Particles Under Continuous Feeding and Discharging in a CFB Dense Zone

DEM simulation of particle mixing in flat-bottom spout-fluid bed