Abstract:Biomass fast pyrolysis fluidized bed reactor is regarded as one of the most promising technologies for high value utilization of biomass. In this work, one two-dimensional fluidized bed reactor model was established, coupling with multiphase CFD simulation method and pyrolysis reaction kinetics, and further verified by the experimental data. This work mainly investigated the effects of biomass inlet and nitrogen inlet modes on multi-process characteristics, such as flow behavior, heat transfer and pyrolysis reaction. The synergistic effects between the two inlet modes were further explored and thus would affect the three-phase pyrolysis product distribution. The results showed that the spatial particle distribution and temperature distribution in the dense phase zone were becoming more uniform and the tar yield increased when the biomass inlet mode changed from single nozzle to double nozzles jetting opposite. Besides, when the nitrogen nozzle number was set as one and the auxiliary gas velocity was set as 0.15 m/s, much larger local circulation formed in the dense phase zone, meanwhile the particle volume fraction and temperature became more evenly distributed, which was conducive to the biomass pyrolysis process. The nitrogen inlet mode was found to show a greater impact on the tar yield compared to the biomass inlet mode. For single gas inlet mode, one biomass nozzle should be preferred for lower auxiliary gas velocity and the opposite double nozzle would be better for higher auxiliary gas velocity. The synergistic effects between biomass and nitrogen inlet modes were further summarized, which were found to have a positive impact on the biomass pyrolysis reaction characteristics. Based on the above conclusions, this work could provide a feasible theoretical guidance for designing fluidized bed pyrolysis reactor and optimizing the biomass pyrolysis process.

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Multi-Fluid Cfd Modeling of Biomass Gasification in Polydisperse Fluidized-Bed Gasifiers

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Modeling Biomass Gasification in Circulating Fluidized Beds

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Three-dimensional simulation of biomass gasification in a full-loop pilot-scale dual fluidized bed with complex geometric structure

Three-dimensional full-loop simulation of biomass gasification in dual fluidized bed

A Review on CFD Simulation of Biomass Pyrolysis in Fluidized Bed Reactors with Emphasis on Particle-Scale Models

Study of biomass gasification in an industrial-scale dual circulating fluidized bed (DCFB) using the Eulerian-Lagrangian method

Coarse-grained CFD-DEM Modelling of Dense Gas-Solid Reacting Flow

Multi-scale CFD Simulations of Bubbling Fluidized Bed Methanation Process

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

Numerical study of biomass gasification in a 0.3 MWth full-loop circulating fluidized bed gasifier

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

CFD modeling of biomass combustion and gasification in fluidized bed reactors using a distribution kernel method

Study of air-steam gasification of spherocylindrical biomass particles in a fluidized bed by using CFD-DEM coupling with the multi-sphere model

Simulation of Biomass-Steam Gasification in Fluidized Bed Reactors: Model Setup, Comparisons and Preliminary Predictions

CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock

Particle Behaviours of Biomass Gasification in a Bubbling Fluidized Bed