Study of biomass gasification combined with CO2 absorption in a dual fluidized bed (DFB) using the Eulerian-Lagrangian method
Mengyao Guo,Jiahui Yu,Shuai Wang,Kun Luo,Jianren Fan
DOI: https://doi.org/10.1016/j.cej.2024.148723
IF: 15.1
2024-03-01
Chemical Engineering Journal
Abstract:Biomass absorption enhanced reforming (AER) gasification technology uses CO2 absorbent as bed material, which can cleanly and efficiently realize the enrichment of H2 and the removal of CO2 in the product gas. However, the in-depth understanding of complex gas–solid flow characteristics and thermochemical behavior in the AER gasification process is still lacking. This work integrates heat transfer and complex reaction kinetics regarding gasification, carbonation, and calcination based on the multiphase particle-in-cell (MP-PIC) method. After model validation, biomass gasification in a pilot-scale dual fluidized bed (DFB) system is numerically studied under the conventional gasification and AER gasification conditions. The physical-thermo-chemical behavior under two gasification conditions is quantitatively compared and analyzed, and the influence of several key operating parameters on gasification performance is investigated under the AER gasification condition. The results show that compared with conventional gasification, AER gasification has the characteristics of (i) the particle movement is more gentle, which is beneficial to the heat and mass transfer process between the bed material and the biomass particles; (ii) the temperature difference in the two reactors is larger and the temperature of reactors is lower, which is beneficial to the carbonation in the gasifier; (iii) it reduces the mole fraction of CO2 by 76.67 %, increases the mole fraction of H2 by 54.58 %, which greatly improves the quality of the gas products. In addition, under the AER gasification condition, increasing the gasification temperature promotes the carbonation reaction and methane steam reforming reaction, thereby improving the gasification performance. The change in steam flow rate has no significant impact on the gasification performance. Furthermore, properly adjusting the content of absorbent can reduce the cost of bed materials. The present work provides a cost-effective approach to gaining insight into the physical-thermo-chemical behavior of AER gasification.
engineering, chemical, environmental