Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Numerical Simulation of a Packed Bed Reactor with Novel Internals—Ⅰ. Flow Field and Residence Time Distribution of Gas Phase

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Numerical simulation for character of fluid flow through packed bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulation of Cross Flow in Fixed Bed Reactor

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Numerical Simulation of Gas-particle Hydrodynamics in CFB

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Simulation of the gas distribution system for a radial flow moving-bed catalytic reforming reactor in change state flow

CFD Simulation and High-Speed Photography of Liquid Flow in the Outer Cavity Zone of a Rotating Packed Bed Reactor

Numerical investigation of transient gas–solid heat transfer in a packed bed: Impact of intra-particle thermal diffusion

Numerical Simulation of Hydrodynamic Behaviors of Internal Circulation Bio-Fluidized Bed Reactor

Modeling gas flows in packed beds with the lattice Boltzmann method: validation against experiments