Abstract:Based on the Ergun’s equation and with considering the convection term and diffusion term of the fluid flow, a mathematic model used to simulate the fluid flow in the fixed-bed reactor with inner immersed tubes was established. Using the model developed, the pressure distribution of the fixed-bed reactor was calculated, and the calculating results have good agreement with the corresponding experimental data obtained from literature, which indicates that the model is reliable. Furthermore, the model was used to study the gas velocity distribution affected by the immersed tubes in the fixed-bed reactor. The results show that along the main gas flow direction, the gas velocity v close to the tube-wall descends remarkably at the front of and behind the tubes because of the hindrance of the tubes, however, the v increases between the tubes. The peak and width of the wavy gas velocity distribution curves along the width of the fixed-bed are relative to the space between the tubes, the inlet gas velocity and the tube arrangement mode. It is found that the hindrance effect of the tube on the gas velocity is only limited within a distance of the tube diameter measured from the center of the tube. It is also shown that the staggered arrangement of the tubes with triangular pitch will cause stronger disturbance of the gas flow than that caused by the in-line arrangement with square pitch, so that the former arrangement mode will favor to the heat transfer and will cause the temperature field to become more uniform in the fixed-bed reactor.

Simulation of the gas distribution system for a radial flow moving-bed catalytic reforming reactor in change state flow

Hydrodynamic behavior of the gas distribution system in radial flow moving-bed reactor

Modeling and Simulation of Commercial Catalytic Reformers

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Optimum Design of Radial Flow Moving-Bed Reactors Based on a Mathematical Hydrodynamic Model

Numerical Simulation of a Packed Bed Reactor with Novel Internals—Ⅰ. Flow Field and Residence Time Distribution of Gas Phase

Numerical Simulation of Cross Flow in Fixed Bed Reactor

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

The Real-Time Dynamic Modeling and Simulation of Reforming Moving-Bed Reactor

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (I) Turbulent Gas-Solid Flow-Reaction Model

Comparison Of Axial And Radial Water Gas Shift Reactors Based On Cfd Simulation

Numerical Simulation of Gas-particle Hydrodynamics in CFB

Mathematical modeling of the residence time distribution in loop reactors

A Gas-solid two-phase flow-reaction model of FCC riser reactors and numerical simulation for them: I . Development of the gas-solid two-phase flow-reaction model

A gas-solid two-phase flow-reaction model of the FCC riser reactors and numerical simulation for them: II . Numerical simulation on the gas-solid two-phase flow and reaction of commercial riser reactors

Numerical Simulation of Multi-phase Flows in the Inlet Bend of a Desulfurization Reactor and Reactor Configuration Optimization

Model on Transport Phenomena and Control of Rod Growth Uniformity in Siemens CVD Reactor

Study on the Stress Distribution and Flow Patterns in a Liquid-Solid Moving Bed Reactor

Investigations on hydrodynamics of radial flow moving bed reactors

Cold Model Experiment and Simulation of Autothermal Reforming Reactor