Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Investigations on hydrodynamics of radial flow moving bed reactors

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Experimental Study on the Influence of Velocity on Hydraulic Characteristics in Reactor Lower Plenum

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

Hydrodynamic behavior of the gas distribution system in radial flow moving-bed reactor

Influence of outward radial gas flow on particle movement in an annular moving bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Optimum Design of Radial Flow Moving-Bed Reactors Based on a Mathematical Hydrodynamic Model

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Numerical Simulation of Cross Flow in Fixed Bed Reactor

Fundamental Studies on the Hydrodynamics and Mixing of Gas and Solid in A Downer Reactor

Study on the Hydrodynamics of a Spouting−Moving Bed

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

Hydrodynamics of Large Jetting Fluidized Bed.

PARTICLE VELOCITY FIELD IN LIQUID-SOLID CIRCULATING FLUIDIZED BEDS

Axial Flow Pattern in a Concurrent Downflow Fluidized Bed (downer) with Linearly Variable Superficial Gas Velocity

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Axial and Radial Profiles of Hydrodynamic Parameters of External-Loop Airlift Reactor