Abstract:Impinging stream technique has been widely used in engineering industries. Insufficient data are available on the effects of dynamic inflow conditions on the flow and turbulence characteristics of an impinging stream reactor. In this study, we investigate and discuss the flow and turbulence characteristics of an impinging stream reactor with dynamic inlet velocity variation, e.g., sinusoidal, parabolic, step or triangular variation. The effects of period, amplitude, phase difference, mean inlet velocity and type of dynamic inlet velocity variation on the motional behaviors of the impinging surface and the mean turbulence kinetic energy (k) of the impingement region are investigated and discussed using particle image velocimetry (PIV) and computational fluid dynamics (CFD) at various values of L/D (the ratio of impinging spacing to nozzle diameter). The results show that the impinging surface makes back-and-forth motions in impinging stream reactors with dynamic inlet velocity variation. The mean k of the impingement region during one period is dominated by both the inlet velocity conditions and the geometric configuration. Dynamic inflow conditions bring more turbulence energy and pulsating characteristics to impinging zones over constant inlet velocity for an instantaneously moving impinging surface. Impinging stream reactors with dynamic inlet velocity variation provides more intense turbulence properties over conventional impinging stream reactors at the same mean inlet velocity. This work shows that the impinging streams with dynamic inlet velocity variation has strong potential for future relevant reactors and processes for engineering applications.

Experimental Study on the Influence of Velocity on Hydraulic Characteristics in Reactor Lower Plenum

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Experimental and Numerical Studies on Flow and Turbulence Characteristics of Impinging Stream Reactors with Dynamic Inlet Velocity Variation

Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays

Effect of Suction and Discharge Conditions on the Unsteady Flow Phenomena of Axial-Flow Reactor Coolant Pump

Experimental Study on PIV Measurement and CFD Investigation of the Internal Flow Characteristics in a Reactor Coolant Pump

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Numerical Simulation of Flow Distribution in the Lower Plenum of NHR200-II

Unbalanced Force Analysis on Valve Core Clamping in Hydraulic Spool Valves

Three Dimensional Numerical Simulation in Lower Header of Reactor Pressure Vessel

Experimental study of turbulent flow in a scaled RPV model by PIV technology

Theoretical And Experimental Study On Natural Circulation Relevant To Nuclear Heating Reactor

Cfd Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer

Study On Hydraulic Characteristics In A Submerged Membrane Bioreactor Process

CFD analysis for full vessel upper plenum in Maanshan Nuclear Power Plant

Numerical Simulation and Geometry Optimization of Hot-Gas Mixing in Lower Plenum of High Temperature Gas-Cooled Reactor

Mechanism and experimental study of thermal mixing of fluid with different temperature

Investigation of the Flow and Temperature Uniformity in the Reactor Core of HTGR

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor

Experimental and Numerical Investigation of the Flow Measurement Method Utilized in the Steam Generator of Htr-Pm