Abstract:The flow characteristics of a 200 mm×2500 mm three-phase continuous loop reactor with a draft tube were systematically investigated with glass beads as the solids phase,air as the gas phase and tap water as the liquid phase,respectively.The operating parameters,including superficial gas velocity,slurry feed velocity and inlet solids holdup in the range of interest in direct coal liquefaction,were varied to demonstrate their effects on the local distributions of gas and solids holdups and internal circulation slurry velocity.The local values of sectional average gas holdup in the draft tube increased with increasing superficial gas velocity,and decreased with increasing inlet solids loadings.Varying slurry feed velocity led to small effects on the local values and distributions of the sectional average gas holdup in the draft tube,while continuous feeding of slurry was helpful to the effective dispersion of gas phase and enhancing aeration in the annulus.Local slurry circulation velocities showed a parabolic profile in radial distribution with the lowest velocity at the central axis of the draft tube.The slurry feed velocity and inlet solids loading had a small effect on slurry circulation,and the slurry circulation intensity defined as the ratio of circulating slurry velocity in the annulus to the feed slurry velocity was in a range of 20—180.The axial and radial distributions of solids holdup were spatially uniform in the reactor,and were affected by superficial gas velocity and slurry feed velocity.

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Structure effect of industrial loop reactors on non-uniform flow characteristics

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Flow Behavior of Liquid Phase in Jet-loop Reactor

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

Local Flow Characteristics of Gas-Liquid-solid Multiphase Continuous Loop Reactor

Numerical Simulation of Liquid-Solid Two-Phase Flow in Tubular Loop Reactor

Computational Fluid Dynamics–Discrete Element Model Simulation of Flow Characteristics and Solids’ Residence Time Distribution in a Moving Bed Air Reactor for Chemical Looping Combustion

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Numerical Simulation of Liquid–solid Two-Phase Flow in a Tubular Loop Polymerization Reactor

Flow mixing model of liquid phase in an internal airlift loop reactor

Energy Dissipation Distribution in a Draft Tube-lifted Gas-Solid Air Loop Reactor

Local gas-liquid mass transfer model in self-aspirated reversed flow jet loop reactor

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Gas Holdup and Liquid Circulation in an Internal Airlift Loop Reactor