Abstract:Fluidized bed reactor is a reactor with complex internal structure and high energy transformation efficiency. A computational fluid dynamics (CFD) model for different structures by using Eulerian-Eulerian double-fluids models was established to help achieve the optimal design of internal-loop fluidized beds. With the aid of this model, the two-phase hydrodynamic characteristics of the flow field, gas holdup distribution, and liquid velocity distribution of the fluidized bed were investigated under different ratios of height to diameter, different ratios of diameters of draft tube to reactor, and height of bottom clearance and operation factors. The internal effects between structure parameters and operation factors were analyzed. The simulation results showed that the ratio of height to diameter can affect the flow pattern of liquid and gas significantly and the low ratio of height to diameter may lead to vortex and backmixing easily, suggesting that the internal draft tube should be implanted and spargers should be designed properly in engineering applications. Diameter ratio of draft tube to reactor has a large effect on liquid recirculation velocity, and thus has a reasonable range. Considering the liquid circulation velocity and gas holdup, the appropriate range of diameter ratio of draft tube to reactor is front 0.6 to 0.8, with 0.7 the ol)timal. Theheight of bottom clearance can affect local flow structure in bottom zone, and its height should be equal to the length of the downcomer. This study indicates that the CFD simulation can be used as a supportive approach for optimizing design and pilot test of reactors in pollution control field.

Structure effect of industrial loop reactors on non-uniform flow characteristics

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Hydrodynamic Instability Analysis of the Axial Flow Pump in an Ethylene Polymerization Loop Reactor

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

CFD MODELLING FOR THE EFFECT OF CIRCULAR FLOW RATE ON THE LIQUID-SOLID FLOW IN A LOOP REACTOR

Study on the Hydrodynamics in Multi-Stage Loop Reactor

Numerical Simulation of Liquid–solid Two-Phase Flow in a Tubular Loop Polymerization Reactor

Three-dimensional CFD Study of Liquid–solid Flow Behaviors in Tubular Loop Polymerization Reactors: the Effect of Guide Vane

Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays

Flow Behavior and Mass Transfer in Three-Phase External-Loop Airlift Reactors with Large Particles

Computational Fluid Dynamics–Discrete Element Model Simulation of Flow Characteristics and Solids’ Residence Time Distribution in a Moving Bed Air Reactor for Chemical Looping Combustion

Flow Behavior of Liquid Phase in Jet-loop Reactor

Study of Particle Size Distribution in Polypropylene Loop Reactor

Local Flow Characteristics of Gas-Liquid-solid Multiphase Continuous Loop Reactor

Effect of Baffle on Hydrodynamics in the Air Reactor of Dual Circulating Fluidized Bed for Chemical Looping Process

Computational fluid dynamics simulation of hydrodynamics in an internal-loop fluidized bed reactor with a funnel-shaped internal

Numerical Simulation of Liquid-Solid Two-Phase Flow in Tubular Loop Reactor

Numerical Optimization on Hydrodynamic Characteristics of Internal-Loop Fluidized Bed Based Upon Structure Parameter Response Relationships