Numerical Simulation of Liquid-Solid Two-Phase Flow in Tubular Loop Reactor

陈纪忠

DOI: https://doi.org/10.3969/j.issn.2095-2783.2008.12.009

2007-01-01

Abstract:Based on the granules kinetics,an Euler-Euler two-fluid model was established for studying the flow patterns of liquid-solid two-phase flow in the tubular loop reactor.The mean pressure gradients in the up-section of the tubular loop reaction were simulated for different slurry inlet velocities when these velocities are much higher than the free setting velocity of the solid particles.The flow pattern simulations show that the volume fractions and velocity distributions of liquid-solid two-phase are different in the up-section,curve-section and down-section of the tubular loop reactor.The secondary flow occurs when the liquid and solid particles enter the curve-section of the tubular loop reactor and the solid particles flow towards the tube wall by the push of centrifugal force,which leads to the un-uniform distribution of solid volume fraction.The slip velocity between the liquid and solid particles exists when the slurry inlet velocity v=3 m?s?1,and the magnitude of the slip velocity reduces with the increase of slurry inlet velocity.When the slurry inlet velocity v≥ 7 m?s?1,the slip velocity between the liquid and the solid particles can be neglected.The comparison of the numerical results calculated by the Euler-Euler two-fluid model presented and the traditional empirical equation for liquid-solid two-phase flow shows that the presented model is available to describe the pressure gradients and slurry flow pattern in the tubular loop reactor.