Abstract:Microbubble reactors play an important role in the development of gas-liquid reaction process enhancement. However, the urgent demand for high efficiency and low energy consumption in gas-liquid reaction processes, as well as the trend towards large-scale production, have put forward higher requirements for the design and optimization of microbubble reactors. In this study, a self-priming microbubble reactor was designed and its structure parameters were optimized by (computational fluid dynamics) CFD simulations. Based on the grid division method combining structured and unstructured grids, the most suitable mesh number is selected, and the simulation calculation time is saved on the premise of ensuring the accuracy. The effects of five structural parameters on the gas content and energy loss was discussed and the optimal structural parameters of the microbubble reactor were determined as follows: the diffusion section length is 75 mm, the contraction angle is 22°, the diffusion angle is 10.5°, the inlet diameter of the gas phase is 6 mm, the inlet diameter of the liquid phase flowing into the gas chamber is 3 mm, the diffusion section inlet diameter is 5 mm. Under the condition of the same inlet flow rate, the outlet gas content of the optimized gas-liquid reactor is increased by 42.9% compared with the initial structure. In the wastewater treatment experiment, the microbubble reactor reduced the chemical oxygen demand of wastewater by 61% within three hours. This study provides significant references for the design of the self-priming microbubble reactor.

Study on characteristic of oxygen transfer in a reaction-precipitation integrative rectangular air-lift loop reactor

Structure effect of industrial loop reactors on non-uniform flow characteristics

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Pilot-scale Test on Treatment of Urban Wastewater Using Reaction- Precipitation Integrative Rectangular Air-lift Loop Reactor

Pilot-scale Research on Reaction-filtration Integrated Rectangular Airlift Loop Reactor for Treatment of Domestic Sewage

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Investigation of hydrodynamics and mass transfer in an internal loop airlift slurry reactor integrating mixing and separation

Performance of an Integrated Reactor with Airlift Loop and Sedimentation for Municipal Wastewater Treatment: A 150 M3/d Pilot Case Study

Hydrodynamic Character of Internal-Loop Airlift Reactor

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Design and structural parameter optimization of Venturi-type microbubble reactor for wastewater treatment by CFD simulation

Treatment of Low C/N Ratio Wastewater Using Reaction-precipitation Integrative Rectangular Airlift Loop Reactor

STUDY ON THE HYDRODYNAMICS AND TRANSFER PROPERTIES OF INDUSTRIAL AIRLIFT REACTORS

Multiphase flow characteristics of a novel internal-loop airlift reactor

Exploring the multiphase flow and mass transfer characteristics for desulfurization in an upflow biogas reactor

The Pilot Study for Oil Refinery Wastewater Treatment Using a Gas–liquid–solid Three-Phase Flow Airlift Loop Bioreactor

CFD Simulation and Structural Optimization in a Novel Airlift Reversible Loop Bioreactor

Computer assisted design and flow field analysis of a multi-tube airlift reactor for biological treatment of oily wastewater

Oxygen Transfer Characteristics in a Pilot-Scale Airlift Internal-Loop Bioreactor for Simultaneous Partial Nitrification and Anaerobic Ammonia Oxidation

Liquid Circulation Velocity and Local Gas Holdup in Air-lift Loop Reactor

Analysis and Measurement of Mass Transfer in Airlift Loop Reactors