Abstract:The focus of the acid gas removal process has shifted from decarbonization and desulfurization to desulfurization in the context of integrating coal chemical technology with green H2 without a water gas shift unit. The conventional Rectisol process, Selexol process, organic amine process, and sulfone-amine process have been reconfigured to form the R-Rectisol process, R-Selexol process, R-MDEA process, and R-Sulfolane-MDEA process to adapt to the shift of acid gas removal target. The removal efficiency of H2S and CO2, process energy consumption, and process cost are investigated to evaluate the technical and economic performance of the above four reconfigured acid gas removal processes. The results indicate that for the R-Recitsol process and R-Selexol process, both high pressure and low temperature increase the relative selectivity of H2S to CO2, thereby enhancing the selective removal of H2S. In contrast, for the R-MDEA process and R-Sulfolane-MDEA process, low pressure and low temperature improve the relative selectivity of H2S to CO2, thereby facilitating the selective removal of H2S. Under optimal operating conditions, the value of relative selectivity of H2S to CO2 of the RSulfolane-MDEA process is the largest, and the relative selectivity of H2S to CO2 of the R-Rectisol process, RSelexol process and R-MDEA process are only 7.64 %, 12.85 %, and 68.40 % of the relative selectivity of H2S to CO2 of the R-Sulfolane-MDEA process, respectively. Compared to the other three reconfigured acid gas removal processes, the R-Sulfolane-MDEA process demonstrates superior advantages in both energy consumption and economic feasibility, provided that the H2S levels remain below 0.1 ppm in purified syngas. This study aims to enhance the decision-making process for gas purification methods in the coal chemical industry by considering integrated green H2 as an alternative to the water gas shift unit.

Exploring the multiphase flow and mass transfer characteristics for desulfurization in an upflow biogas reactor

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

Optimization Design and Experimental Study of Two‐Phase Integrated Sludge Thickening and Digestion Reactor

Co-gasification of Acid Hydrolysis Residues and Sewage Sludge in a Downdraft Fixed Gasifier with CaO As an In-Bed Additive

Configuration Optimization of a Biomass Chemical Looping Gasification (CLG) System Combined with CO2 Absorption

Selection and Design of the Biogas Biological Desulphurization Reactor

CFD-DEM simulations of a gas-solid-liquid fluidization system: Effects on the flow field and particle behavior of semi-dry desulfurization fluidized bed

Syngas analysis by hybrid modeling of sewage sludge gasification in downdraft reactor: Validation and optimization

Experimental Study on Desulfurization Efficiency and Gas–liquid Mass Transfer in a New Liquid-Screen Desulfurization System

Mass Transfer and Reaction Process of the Wet Desulfurization Reactor with Falling Film by Cross-Flow Scrubbing

Determining the Performance for an Integrated Process of COD Removal and CO2 Capture

Three-dimensional Modelling of the Multiphase Hydrodynamics in a Separated-Gasification Chemical Looping Combustion Unit During Full-Loop Operation

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Dynamic Modeling of Biogas Upgrading in Hollow Fiber Membrane Contactors

Numerical and experimental assessment of parametric effect on steam-carbon dioxide co-gasification of sewage sludge and coal in an updraft reactor

Optimization of supercritical water oxidation for coal-gasification wastewater treatment using response surface methodology

Design and structural parameter optimization of Venturi-type microbubble reactor for wastewater treatment by CFD simulation

Optimal Design of a Wet-Type Desulphurization Absorber by the Numerical Simulation Method

Automatie Intercycle Loop Reactor System and Its Application for Hydrogen Sulfide Absorption from Natural Gas