Abstract:Ships have become an important source of SO2 emission in coastal areas with the rapid development of maritime transport. It is of great significance to develop a marine scrubber for reducing SO2 emission of ships. In this study, numerical simulation of a full-scale marine spray scrubber is conducted to investigate two-phase flow pattern and SO2 absorption process in the scrubber. A desulfurization model based on seawater absorbent is coupled into the simulation, which considers the mass transfer between phases and seawater aqueous phase chemistry simultaneously. A distribution ring is introduced in the scrubber to enhance the desulfurization performance of the scrubber. The result of simulation shows that the distribution ring can optimize effectively the distribution of gas-liquid phases and enhance the SO2 absorption. Under vertical condition, the desulfurization efficiency could be promoted approximate 6% after installing a distribution ring. The inclined condition resulting from the ship swinging could lead to the uneven distribution of droplets and an obvious decrease (8.7%) of desulfurization efficiency, whereas the desulfurization performance of the scrubber could be ensured with a distribution ring installed even under an inclined condition. Finally, a spray scrubber design scheme has been developed and successfully applied in the exhaust gas cleaning system (EGCS) of a container ship. Test result shows the outlet average value of SO2/CO2 can be reduced to 3.55. Meanwhile, the consistency of test data and calculation result indicates the applicability of the numerical model established for the simulation and optimization of the scrubber in industrial applications also. Implications: EGCS is an effective method to reduce SO2 emission of marine industry. However, different from a land desulfurization tower, the application of a spray scrubber in EGCS faces more problems due to the different application scenarios and complex sea conditions (inclined condition resulting from ships swinging and so on) during sailing. In this work, a numerical model capable of investigating physical and chemical phenomena in the scrubber simultaneously is established, which can produce a great amount of data for the operation instruction of EGCS and the design and optimization of the marine spray scrubber. The distribution ring is introduced in the marine spray scrubber to intensify the SO2 absorption and enhance the desulfurization performance of the scrubber under different working conditions.

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

CFD simulation and optimization of flow field and SO2 absorption in impinging stream scrubber

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling

Optimization the operation parameters of SDA desulfurization tower by flow coupling chemical reaction model

Study on Flow Field Optimization in Wet Flue Gas Desulfurization Spray Scrubber

Integrated Modeling of Semi-dry Flue Gas Desulfurization

Enhancement of Mass Transfer Between Flue Gas and Slurry in the Wet Flue Gas Desulfurization Spray Tower

Experimental Study on Removal Characteristics of SO3 by Wet Flue Gas Desulfurization Absorber

Mechanism of SO3/H2SO4 transformation and reduction in wet flue gas desulfurization systems

Simulation investigation on marine exhaust gas SO2 absorption by seawater scrubbing

Factors influencing desulphurization efficiency of wet flue gas desulphurization system

Factors Influencing Desulfurization Efficiency of Wet Flue Gas Desulfurization System

Promoting the synergistic removal of SO 3 aerosols and particles during the flue gas condensation by combining alkali spray and turbulent agglomeration

CFD-DEM simulations of a gas-solid-liquid fluidization system: Effects on the flow field and particle behavior of semi-dry desulfurization fluidized bed

Experimental Study of Wet Flue Gas Desulphurization of Impinge Liquid Column Tower

Modeling on circulating fluidized bed flue gas desulfurization