Abstract:In this paper, the main results of an experimental study on SO2 absorption in a bench-scale θ-ring packed tower using 0.3 mol·L−1 ethylenediamine-phosphoric acid solution was reported, and the effects of main technological parameters on the desulfurization efficiency were investigated. To uncover the mechanism behind the experimental observation, a one-dimensional model incorporated with equations of vapor-liquid equilibrium, heat, and mass transfer for simulating chemical absorption of SO2 with packed tower was also presented. Furthermore, the parameter distributions associated with heat and mass transfer characteristics along the absorber were also investigated. The results indicated that the relative errors of desulfurization efficiency between predicted and experimental values are less than 18.5% under different conditions and the model had depicted the tendency quite well. In addition, the desulfurization efficiency has positive correlation with increasing liquid-gas ratio, packing height, and ethylenediamine concentration, and declines with the increasing of inlet SO2 concentration, S(IV) concentration of lean amine, and operating temperature, respectively. Insights are given on the contribution of liquid chemistry reaction and interphase mass transfer on effective utilization of packing layer. Especially, enhancement factor and mass-transfer driving force along the absorber impact directly the SO2 absorption efficiency. Furthermore, the temperature rise has multiple effects on SO2 flux distribution, as mainly reflected in gradual accumulation of SO2(free) and decreasing of SO2 solubility in amine solution. This model can provide engineering guidance to design a packed tower as well as desulfurization process optimization.

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling

Studies on flue gas desulfurization by chemical absorption using an ethylenediamine-phosphoric acid solution

Modeling and experimental studies on chemical absorption of sulphur dioxide with ethylenediamine-phosphoric acid solution in a θ-ring packed tower for purification of flue gas

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

Study on Flue Gas Desulfurization Process with Selective SO2 Removal by N-formylmorpholine

Numerical Simulation and Experimental Study on Desulfurization Process in FGD Absorbers

Experimental Study on Removal Characteristics of SO3 by Wet Flue Gas Desulfurization Absorber

A study of experimental and improved absorption model for the spray towers of wet flue gas desulfurization

Integrated Modeling of Semi-dry Flue Gas Desulfurization

Hybrid Modeling and Real-time Predictive Scheduling of Wet Flue Gas Desulfurization for Energy Saving and Life Extension

Factors influencing desulphurization efficiency of wet flue gas desulphurization system

Modeling for the Absorption of SO2 in Flue Gas with Landfill Leachate Coupled with Desorption of Ammonia

Influence of Operating Parameters on Performance of SO2 Absorption in Fulvic Acid Solution

Factors Influencing Desulfurization Efficiency of Wet Flue Gas Desulfurization System

Chemical Absorption of SO2 by Using Ethylene Diamine/Phosphoric Acid Solution

A Nonequilibrium Stage Model to Simulate the Chemical Absorption of SO2

Effective Absorption Mechanism of SO2 and NO2 in the Flue Gas by Ammonium-Bromide-Based Deep Eutectic Solvents

Study on a Novel Semidry Flue Gas Desulfurization with Multifluid Alkaline Spray Generator

Optimization of CO2Absorption Characteristic under the Influence of SO2in Flue Gas by Hollow Fiber Membrane Contactor

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia