Abstract:Combined CO2 and SO2 absorption performance in a new combined capture process was evaluated in this work by experimental study using a lab-scale packed column system and a developed rate-based model in Aspen Plus. The combined absorption experiments were carried out to identify the impact of several key operating parameters, including flue gas SO2 and CO2 concentrations, CO2 and SO2 loadings, the absorption temperature, and the L/G ratio, on CO2 absorption and NH3 volatilization. Experimental results indicated that 85% CO2 absorption efficiency was achieved in 5 wt% aqueous NH3 solvent containing lean CO2 loading at 0.2 mol CO2/mol NH3 (C/N) and SO2 loading at 0.1 mol SOilmol NH3 (S/N). The rate-based model was developed using the electrolyte-NRTL method and the RateFrac module in Aspen Plus, and validated as compared to the present experimental results. The modeling results showed that the SO2 loading provided the similar effect on the CO2 mass transfer, the absorption efficiency and the heat of CO2 absorption as compared to the CO2 loading, however, the SO2 loading resulted in lower NH3 volatilization compared to CO2 loading. The lean CO2 loading and the solvent flow rate dynamic adjustment approaches in association with the lean NH3 solvent splitting process were studied to analyze the potential coordination of the combined absorption process and the sulfite treatment system. Maintaining 85% CO2 capture efficiency was possible when SO2 loading was increased from 0.1 to 0.2 S/N by reducing the lean CO2 loading from 0.2 to 0.088 C/N or increasing the solvent flow rate from 8 to 14.1 L/h. The time window for the SO2 treatment by the precipitation process was increased with the increasing split ratio of the lean NH3 solvent splitting process that was associated with the dynamic adjustment approaches. In the present study, the discussion of the combined absorption experiments using the CO2 and SO2 loaded NH3 solvent, the developed rate-based model, and the operation strategies provided valuable contributions to the advancement of the combined CO2 and SO2 capture process.

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

Rate-based modelling of combined SO 2 removal and NH 3 recycling integrated with an aqueous NH 3 -based CO 2 capture process

Simultaneous Absorption of SO2 and CO2 from Flue Gas Using Aqueous Ammonia

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Meso-scale CFD Modelling of CO2 Capture by Aqueous Ammonia Part I: Modeling

Modeling Solid-Liquid Equilibrium of the NH3-CO2-SO2-K2SO4-H2O System and Its Application to Combined Capture of CO2 and SO2 Using Aqueous Ammonia

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Modeling Analysis and Control of Carbon Dioxide Capture System From Flue Gas

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Process modeling of an advanced NH₃ abatement and recycling technology in the ammonia-based CO₂ capture process

Simulation of CO2 Chemical Absorption Process and Environmental Assessment

Simulation and Optimization Study on Aqueous MEA-Based CO2 Capture Process

An Advanced, Ammonia-Based Combined NOx/SOx/CO2 Emission Control Process Towards a Low-Cost, Clean Coal Technology

Dynamic modeling and analysis of a post-combustion carbon dioxide capture system

Improved CO2 Capture Method by Absorption

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling